SRC4194
SBFS025A − JUNE 2004 − REVISED JULY 2004
4-Channel, Asynchronous Sample Rate Converter
D
INPUT-TO-OUTPUT SAMPLING RATIO
READBACK (SOFTWARE MODE ONLY)
FD EATURES
AUTOMATIC SENSING OF INPUT-TO-OUTPUT
SAMPLING RATIO
D
POWER-DOWN MODES
D
SUPPORTS OPERATION FROM A SINGLE +1.8V
OR +3.3V POWER SUPPLY
D
D
D
WIDE INPUT-TO-OUTPUT SAMPLING RANGE:
16:1 to 1:16
D
AVAILABLE IN A TQFP-64 PACKAGE
SUPPORTS INPUT AND OUTPUT SAMPLING
RATES UP TO 212kHz
DYNAMIC RANGE: 144dB (−60dbFS Input,
BW = 20Hz to f /2)
AD PPLICATIONS
s
DIGITAL MIXING CONSOLES
D
THD+N: −140dB (0dbFS Input, BW = 20Hz to fs/2)
D
D
D
D
DIGITAL AUDIO WORKSTATIONS
AUDIO DISTRIBUTION SYSTEMS
BROADCAST STUDIO EQUIPMENT
GENERAL DIGITAL AUDIO PROCESSING
D
HIGH-PERFORMANCE, LINEAR-PHASE DIGITAL
FILTERING WITH BETTER THAN 140dB OF
STOP BAND ATTENUATION
D
D
FLEXIBLE AUDIO SERIAL PORTS:
− Master or Slave Mode Operation
− Supports I2S, Left-Justified, Right-Justified,
and TDM Data Formats
− TDM Mode Allows Daisy-Chaining of Up to
Four Devices
DESCRIPTION
The SRC4194 is a four-channel, asynchronous sample
rate converter (ASRC), designed for professional and
broadcast audio applications. The SRC4194 combines a
wide input-to-output sampling ratio with outstanding
dynamic range and ultra low distortion. The input and
output serial ports support the most common audio data
formats, as well as a time division multiplexed (TDM)
format. This allows the SRC4194 to interface to a wide
range of audio data converters, digital audio receivers and
transmitters, and digital signal processors.
SUPPORTS 24-, 20-, 18-, or 16-BIT INPUT AND
OUTPUT DATA:
− All Output Data is Dithered from the Internal
28-Bit Data Path
D
D
SERIAL PERIPHERAL INTERFACE (SPI) PORT
SUPPORTS REGISTER READ AND WRITE
OPERATIONS IN SOFTWARE MODE
BYPASS MODE:
− Routes Input Port Data Directly to the Output
Port
The SRC4194 may be operated in Hardware mode as a
standalone pin-programmed device, with dedicated
control pins for serial port mode, audio data format, soft
mute, bypass, and digital filtering functions. Alternatively,
the SRC4194 may be operated in Software mode, where
a four-wire serial peripheral interface (SPI) port provides
access to internal control and status registers.
D
D
D
FOUR GROUP DELAY OPTIONS FOR THE
INTERPOLATION FILTER
DIRECT DOWNSAMPLING OPTION FOR THE
DECIMATION FILTER
DIGITAL DE-EMPHASIS FILTER:
− User-Selectable for 32kHz, 44.1kHz, and
48kHz Sampling Rates
The SRC4194 operates from either a +1.8V core supply or
a +3.3V core supply. When operating from +3.3V, the
+1.8V required by the core logic is derived from an internal
voltage regulator. The SRC4194 also requires a digital I/O
supply, which operates from +1.65V to +3.6V. The
SRC4194 is available in a TQFP-64 package.
D
D
SOFT MUTE FUNCTION
PROGRAMMABLE DIGITAL OUTPUT
ATTENUATION (SOFTWARE MODE ONLY):
− 256 Steps: 0dB to −127.5dB with 0.5dB Steps
Patents pending.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
ꢀꢁ ꢂ ꢃꢄ ꢅ ꢆꢇ ꢂꢈ ꢃ ꢉꢆꢉ ꢊꢋ ꢌꢍ ꢎ ꢏꢐ ꢑꢊꢍꢋ ꢊꢒ ꢓꢔ ꢎ ꢎ ꢕꢋꢑ ꢐꢒ ꢍꢌ ꢖꢔꢗ ꢘꢊꢓ ꢐꢑꢊ ꢍꢋ ꢙꢐ ꢑꢕꢚ ꢀꢎ ꢍꢙꢔ ꢓꢑꢒ
ꢓ ꢍꢋ ꢌꢍꢎ ꢏ ꢑꢍ ꢒ ꢖꢕ ꢓ ꢊ ꢌꢊ ꢓ ꢐ ꢑꢊ ꢍꢋꢒ ꢖ ꢕꢎ ꢑꢛꢕ ꢑꢕ ꢎ ꢏꢒ ꢍꢌ ꢆꢕꢜ ꢐꢒ ꢇꢋꢒ ꢑꢎ ꢔꢏ ꢕꢋꢑ ꢒ ꢒꢑ ꢐꢋꢙ ꢐꢎ ꢙ ꢝ ꢐꢎ ꢎ ꢐ ꢋꢑꢞꢚ
ꢀꢎ ꢍ ꢙꢔꢓ ꢑ ꢊꢍ ꢋ ꢖꢎ ꢍ ꢓ ꢕ ꢒ ꢒ ꢊꢋ ꢟ ꢙꢍ ꢕ ꢒ ꢋꢍꢑ ꢋꢕ ꢓꢕ ꢒꢒ ꢐꢎ ꢊꢘ ꢞ ꢊꢋꢓ ꢘꢔꢙ ꢕ ꢑꢕ ꢒꢑꢊ ꢋꢟ ꢍꢌ ꢐꢘ ꢘ ꢖꢐ ꢎ ꢐꢏ ꢕꢑꢕ ꢎ ꢒꢚ
Copyright 2004, Texas Instruments Incorporated
www.ti.com