April 19, 2012
LMP92001
Analog System Monitor and Controller
Programmable window comparator function
■
■
1.0 General Description
Interrupt signal generation for input out-of-bound condition
The LMP92001 is a complete analog monitoring and control
circuit which includes a sixteen channel 12-bit Analog to Dig-
ital Converter (ADC), twelve 12-bit Digital to Analog Convert-
ers (DACs), an internal reference, an internal temp sensor,
an 8-bit GPIO port, and an I2C-compatible interface.
12 Programmable Analog Voltage Outputs
Twelve 12-bit DACs
■
■
■
■
Guaranteed Monotonic
Settling Time 8.5 µs
The ADC can be used to monitor rail voltages, current sense
amplifier outputs or sensors and includes a programmable
window comparator function on six of its 16 channels to detect
out-of range conditions.
Simultaneous update of all channels to same value
Asynchronous output control forces rail voltage at output
■
Voltage Reference
User-selectable source: External or Internal
■
■
The DACs can be used to control PA bias points, actuators,
potentiometers, etc. When required, the outputs can be in-
stantaneously driven to either supply rail using the output
switches and the asynchronous DAC control inputs.
Internal Reference 4.5V ±0.7%
Analog Temperature Sensor
Readable via ADC channel 17
■
■
Both ADC and DACs can use either the internal 4.5V refer-
ence or an external reference independently.
Temperature Error ±2°C
8-bit GPIO Port
Each bit individually programmable
I2C-Compatible Bus
The built-in temperature sensor is treated as the 17th analog
sense input. In addition, the 8-bit GPIO port allows for the
resources of the microcontroller to be further extended, pro-
viding even more flexibility.
■
Supports Standard and Fast Modes
■
■
■
The LMP92001 is available in a space saving 10mmx5.5mm
LLP 54-pin package and is operational over the full − 40°C to
125°C temperature range.
Bus TIMEOUT function
Supports Block data transfers
LLP-54 package (10 x 5.5 mm, 0.5 mm pitch)
2.0 Features
3.0 Applications
16 Analog Voltage Monitoring Channels
RF PA Bias Monitoring and Control
■
■
■
12-bit ADC with programmable input MUX
■
■
■
System Monitoring and Control
No Missing Codes
Industrial Monitoring and Control
Total Unadjusted Error (TUE) ±0.1%
Test Equipment and Instrumentation
■
Single-Shot or Continuous Conversion Modes
■
4.0 Block Diagram
30132736
National Semiconductor® is a registered trademark of National Semiconductor Corporation.
© 2012 Texas Instruments Incorporated
301327 SNAS507B
www.ti.com