915.00 MHz Two Port SAW Resonator
•
•
•
•
Ideal for 915.00 MHz Transmitters
Nominal Phase Shift of 180° at Resonance
Quartz Stability
SQ5001
Ultra Miniature Ceramic SMD Package (QCC8C)
Absolute Maximum Rating (Ta=25°C)
Parameter
CW RF Power Dissipation
Rating
10
Unit
dBm
V
P
DC Voltage
VDC
TA
Tstg
±30
Operating Temperature Range
Storage Temperature Range
-10 ~ +60
-40 ~ +85
°C
°C
Electronic Characteristics
Parameter
Sym
fc
Minimum
Typical
915.00
-
Maximum
Unit
MHz
KHz
NS
-
NS
Frequency (25°C)
Nominal Frequency
Tolerance from 915.00 MHz
∆fc
IL
± 150
Insertion Loss
Quality Factor
-
-
-
7.0
9.0
dB
Unloaded Q-Value
Qu
QL
7,230
4,000
-
-
-
-
50Ω Loaded Q-Value
Turnover Temperature
Turnover Frequency
Temperature Stability
To
fo
25
-
-
fc
55
-
°C
KHz
ppm/°C2
ppm/yr
MΩ
Frequency Temperature Coefficient
Absolute Value during the First Year
FTC
-
0.032
-
Frequency Aging
|fA|
-
-
-
-
10
-
DC Insulation Resistance Between any Two Pins
1.0
RF Equivalent RLC Model
Motional Resistance
Motional Inductance
Motional Capacitance
Shunt Static Capacitance
RM
LM
-
124
155.9291
0.1942
1.35
182
Ω
µH
fF
-
-
-
-
CM
Co
1.10
1.60
pF
NS = Not Specified
Note:
The measurement includes case parasitic capacitance.
1.
The frequency fc is the frequency of minimum IL with the resonator
in the specified test fixture in a 50Ω test system with VSWR ≤ 1.2:1.
6.
7.
8.
Derived mathematically from one or more of the following directly
measured parameters: fc, IL, 3 dB bandwidth, fC versus TC, and Co.
2.
3.
Unless noted otherwise, case temperature TC = +25°C±2°C.
The specifications of this device are based on the test circuit shown
above and subject to change or obsolescence without notice.
Frequency aging is the change in fC with time and is specified at
+65°C or less. Aging may exceed the specification for prolonged
temperatures above +65°C. Typically, aging is greatest the first year
after manufacture, decreasing in subsequent years.
Typically, equipment utilizing this device requires emissions testing
and government approval, which is the responsibility of the
equipment manufacturer.
4.
5.
Turnover temperature, T0, is the temperature of maximum (or
turnover) frequency, f0. The nominal frequency at any case
temperature, TC, may be calculated from: f = fo [1 - FTC (TO - TC)2].
9.
Our liability is only assumed for the Surface Acoustic Wave (SAW)
component(s) per se, not for applications, processes and circuits
implemented within components or assemblies.
This equivalent RLC model approximates resonator performance
near the resonant frequency and is provided for reference only. The
capacitance CO is the measured static (nonmotional) capacitance
between input terminal and ground or output terminal and ground.
10. For questions on technology, prices and delivery, please contact our
sales offices or e-mail to sales@vanlong.com.
Phone: +86 10 6301 4184
Fax: +86 10 6301 9167
Email: sales@vanlong.com
Web: http://www.vanlong.com
SQ5001
© 2004 by Vanlong Technology Co., Ltd.