1
Optoway
SPM-9100FWG
***********************************************************************************************************************************************************************
SPM-9100FWG (RoHS Compliant)
3.3V / 850 nm / 2.125 Gbps Digital Diagnostic SFP LC SINGLE-MODE TRANSCEIVER
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Hot-Pluggable SFP Footprint LC Optical Transceiver
l Small Form-Factor Pluggable (SFP) MSA compatible
l Compliant with Fiber Channel FC-PH-2 for
200-M5-SN-1 and 200-M6-SN-1
The SPM-9100FWG series multi-mode transceivers is
small form factor pluggable module for bi-directional serial
optical data communications such as Gigabit Ethernet
1000BASE-SX and Fiber Channel FC-PH-2 for
200-M5-SN-1 and 200-M6-SN-1. It is with the SFP 20-pin
connector to allow hot plug capability. Digital diagnostic
functions are available via an I2C series bus specified in the
SFP MSA SFF-8472. This module is designed for
multi-mode fiber and operates at a nominal wavelength of
850 nm. The transmitter section uses a Vertical Cavity
Surface Emitted Laser (VCSEL) and is a Class 1 laser
compliant according to International Safety Standard IEC
60825. The receiver section uses an integrated GaAs
detector preamplifier (IDP) mounted in an optical header
and a limiting post-amplifier IC.
l Compliant with IEEE 802.3z Gigabit Ethernet
1000BASE-SX
l SFF-8472 Digital Diagnostic Function
l Link Distance at 2.125 Gbd
150 m links with 62.5/125 mm MMF Cables
300 m links with 50/125 mm MMF Cables
l Link Distance at 1.026 Gbd
300 m links with 62.5/125 mm MMF Cables
500 m links with 50/125 mm MMF Cables
l AC/AC Coupling according to MSA
l Single +3.3 V Power Supply
l RoHS Compliant
l -10 to 85oC Operation
l Class 1 Laser International Safety Standard IEC 60825
Compliant
LASER SAFETY
This multi-mode transceiver is a Class 1 laser product. It
complies with IEC 60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports
of the module shall be terminated with an optical connector
or with a dust plug.
APPLICATIONS
l Gigabit Ethernet Switches and Routers
l Fiber Channel Switch Infrastructure
l XDSL Applications
l Metro Edge Switching
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
FC-PI
Distance Wavelength
Package
Temp. TX Power RX Sens.
(oC)
(dBm) (dBm) Compliant
LC SFP with DMI -10 to 85 -4 to -9.5 -15 Yes
RoHS
(m)
(nm)
SPM-9100FWG 2.125/1.063 200/100
150/300**
850
*: 150 meter for 62.5/125 mm MM fiber; 300 meter for 50/125 mm MM Fiber.
Absolute Maximum Ratings
Parameter
Storage Temperature
Symbol
Tstg
Min
-40
Max
85
Units
oC
Notes
Air flow 1m/sec
Operating Case Temperature
Power Supply Voltage
Topr
Vcc
-10
-0.5
85
3.6
oC
V
Recommended Operating Conditions
Parameter
Power Supply Voltage
Case Operating Temperature
Power Supply Current
Data Rate
Symbol
Min
3.1
Typ
Max
3.5
Units / Notes
Vcc
Topr
ICC (TX+RX)
3.3
V
-10
85
250
oC / Air flow 1m/sec
mA
1000
2125
Mb/s
***********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw
12/1/2005 V2.0