®
SP3070E - SP3078E Family
±15kV ESD-Protected, 3.3V, 1/8 Load, Failsafe
RS-485/RS422 Transceivers
FEATURES
1
8
7
6
5
VCC
B
RO
■ ±15kV ESD protection for RS485 pins
8 PIN NSOIC
RE
DE
DI
2
3
4
■ 3.3V low-power operation
SP3072E
SP3075E
SP3078E
A
■ Advanced receiver-failsafe protection for
open, shorted or terminated lines
GND
Half Duplex
■ Up to 256 Transceivers may share bus
■ Very low load for 8x greater fanout
■ Hot Swap glitch protection RE and DE
VCC
RO
1
8
7
6
5
A
B
Z
Y
8 PIN NSOIC
■ Thermal shutdown protects against driver
2
3
4
SP3071E
SP3074E
SP3077E
contention
DI
I
■ Available in three industry standard foot-
GND
Full Duplex
prints
■ SP3070E, SP3073E and SP3076E in Full-Duplex (14 pin)
■ SP3071E, SP3074E and SP3077E in Full-Duplex (8 pin)
■ SP3072E, SP3075E and SP3078E in Half-Duplex (8 pin)
■ Three applications-optimized speed grades
■ SP3070-72E: 250kbps fully slew-limited
■ SP3073-75E: 500kbps slew-limited
■ SP3076-78E: 16Mbps high speed
■ Small form factor SO-narrow packages
NC
1
VCC
14
RO
RE
DE
DI
2
3
4
5
6
7
NC
A
13
12
11
10
14 Pin NSOIC
SP3070E
SP3073E
SP3076E
B
Z
Full Duplex
GND
Y
9
8
NC
GND
■ Industrial (-40 to +85ºC) and Extended
(-40 to +125ºC) temperature grades
Now Available in Lead Free Packaging
APPLICATIONS
■ Industrial Control, Utility Meters Building Automation, Instrumentation, Point of Sale
DESCRIPTION
The SP3070-3078E differential line transceivers are suitable for bidirectional communication
on balanced multipoint bus transmission lines and comply with both RS485 and RS422 EIA
Standards. Each device consists of a differential driver and differential receiver. All devices
operate from a 3.3V power supply.
High receiver input impedance allows a large number of transceivers to share a common data
bus while maintaining signal margin and without excessive loading or use of expensive
repeaters. The high impedance driver output is maintained over the entire common-mode
voltage range from -7 to +12V. Receivers will failsafe to logic 1 output when inputs are open,
shorted or terminated. Drivers include built-in short-circuit protection and a thermal-overload
shutdown to protect against excessive power dissipation from bus contention or cable faults.
All RS485 inputs are ESD protected up to ±15kV (Air-Gap and Human Body Model) and up
to ±8kV Contact discharge (IEC 1000-4-2).
Date: 03/31/05
SP3070E - SP3078E Family, ± 15kV ESD-Protected, Failsafe RS-485/RS422 Transceivers
© Copyright 2005 Sipex Corporation
1