SP-ETH-2 Ethernet Protector
Sixnet Networking Series
10/100BaseT(X) Ethernet Surge and Lightning Protector
Surge Protectors Save Equipment and Money
Protect your 10BaseT or 100BaseTx devices from voltage
surges and lightning strikes. A UPS claims to protect your
computer from power line surges - but is it fully protected?
Surges striking another Ethernet device can easily travel
through network cabling to threaten your expensive computer,
or worse - your irreplaceable data. If your network connects
devices in different areas of your building, chances are multiple
powersystemssupplyyourequipment.Thismeansthepotential
for ground loops and other classic instrumentation faults is ever
present. The solution is simple - install an inexpensive surge
suppressor on each Ethernet port.
PRODUCT HIGHLIGHTS
n Advanced 3 stage hybrid protection
n Dual port – protects two Ethernet devices
n Save money on repair and replacement
Protects:
n Modular and compact design
Printers, PLC’s, Computers, Hubs,
Ethernet I/O, Switches, Workstations,
n DIN rail or direct panel mounting
n Protective grounding to DIN rail
n Compatible with Sixnet’s Industrial Ethernet Switch
and much more.
PERFORMANCE SPECIFICATIONS
MECHANICAL DRAWING
n
High energy metal oxide varistors (MOVs) with a double
network of ultra-fast diodes and silicon avalanche diodes
4.05”
n
Usage: 10BaseT or 100BaseTx
Ports protected: 2 (4 lines per port)
Connectors: RJ45 (pins 1, 2, 3, 6)
Side View
2.25”
n
n
n
Surge capacity: 1 kA / line
n
Clamp and rated: 10 V and 5 V
5.10”
Direct Panel
Grounding
n
Max. frequency: 155 MHz
Operating temp.: -40 to +85 oC
n
Top View
1.00”
n
Attenuation: Better than -0.3 dB at 100 MHz
n
N.E.X.T.: Better than -43 dB at 100 MHz
4.55”
n
Ratings: EIA/TIA (TSB 40A)
Bottom
View
INSTALLATION INSTRUCTIONS
1. Snap to DIN rail or screw to panel. Make sure DIN rail is
grounded. Use grounding kit if direct panel mounting.
2. Correct grounding is essential. Minimize distance from
protector to ground point which should be common with
AC GND.
3. Connect “unprotected” port to incoming line. Use supplied
cable to connect “protected” port to device to be protected.
4. Important notes: Always use supplied patch cable. Ground
leads should be 14AWG or larger and less than 12”.
All specifications are subject to change. Consult factory for latest info.
0.198
Dia.
Units are installed
inline and identified
with “protected’
and “unprotected”
to provide failsafe
installations.
DIN Mounting
ORDERING GUIDE
SP-ETH-2 Dual port protector (1 piece)
SP-ETH-2-5 Dual port protector (5 pack)
Notes: Each protector supplied with a grounding kit for direct panel
mounting and two 4 ft. Ethernet patch cables (cat. 5).
Sixnet Technology Park
331 Ushers Road
Ballston Lake, NY 12019
USA
•
•
As the global experts in communication, monitoring and control for
industrial automation and networking, Red Lion has been delivering
innovative solutions for over forty years. Our award-winning
technology enables companies worldwide to gain real-time data
visibility that drives productivity. Product brands include Red Lion,
N-Tron and Sixnet. With headquarters in York, Pennsylvania, the
company has offices across the Americas, Asia-Pacific and Europe.
For more information, please visit www.redlion.net. Red Lion is a
Spectris company.
Americas
sales@redlion.net
Asia-Pacific
asia@redlion.net
Europe
Middle East
Africa
w w w . r e d l i o n . n e t
europe@redlion.net
Connect. Monitor. Control.
ADLD0216 090514 © 2014 Red Lion Controls
+1 (717) 767-6511