320W Single Output with PFC Function
SP-320 series
Features :
Universal AC input / Full range
Built-in active PFC function, PF>0.95
Protections:Short circuit/Over load/Over voltage/Over temperature
Forced air cooling by built-in DC Fan
Built-in fan speed control
Fixed switching frequency at 100KHz
3 years warranty
SPECIFICATION
MODEL
SP-320-5
SP-320-7.5
SP-320-12
SP-320-13.5 SP-320-15
SP-320-24
SP-320-27
SP-320-48
DC VOLTAGE
5V
7.5V
12V
13.5V
22A
15V
24V
27V
48V
RATED CURRENT
CURRENT RANGE
RATED POWER
55A
40A
25A
20A
13A
11.7A
6.7A
0 ~ 60A
275W
0 ~ 40A
300W
150mVp-p
6 ~ 9V
2.0%
0 ~ 25A
300W
0 ~ 22A
297W
0 ~ 20A
300W
0 ~ 13A
312W
0 ~ 11.7A
315.9W
200mVp-p
26 ~ 32V
1.0%
0 ~ 6.7A
321.6W
240mVp-p
41 ~ 56V
1.0%
RIPPLE & NOISE (max.) Note.2 150mVp-p
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE Note.3 2.0%
150mVp-p
10 ~ 13.2V
1.0%
150mVp-p
12 ~ 15V
1.0%
150mVp-p
13.5 ~ 18V
1.0%
150mVp-p
20 ~ 26.4V
1.0%
OUTPUT
4.5 ~ 5.5V
LINE REGULATION
0.5%
1.0%
0.5%
0.3%
0.3%
0.3%
0.2%
0.2%
0.2%
LOAD REGULATION
SETUP, RISE, HOLD TIME
1.0%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
800ms, 50ms, 16ms/230VAC
2500ms, 50ms, 16ms/115VAC at full load
VOLTAGE RANGE
FREQUENCY RANGE
POWER FACTOR
88 ~ 264VAC
47~63Hz
120 ~ 370VDC
PF>0.95/230VAC
PF>0.98/115VAC at full load
86% 86%
INPUT
EFFICIENCY (Typ.)
AC CURRENT
79%
83%
86%
87%
88%
89%
5A/115VAC
22A/115VAC
<1mA / 240VAC
2.5A/230VAC
40A/230VAC
INRUSH CURRENT (max.)
LEAKAGE CURRENT
105 ~ 135% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
9.4 ~ 10.9V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V 33.7 ~ 39.2V 57.6 ~ 67.2V
Protection type : Shut down o/p voltage, re-power on to recover
80 (70 5V only) (TSW1 : Detect on heatsink of power transistor)
OVER LOAD
5.75 ~ 6.75V
PROTECTION OVER VOLTAGE
5
5
OVER TEMPERATURE
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
-20 ~ +65 (Refer to output load derating curve)
WORKING TEMP.
20 ~ 90% RH non-condensing
WORKING HUMIDITY
ENVIRONMENT
STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.03%/ (0 ~ 50
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL60950, TUV EN60950 Approved
SAFETY STANDARDS
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
EMS IMMUNITY
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
Compliance to EN55022 (CISPR22) Class B
Compliance to EN61000-3-2,-3
SAFETY &
EMC
(Note 4)
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
MTBF
207K hrs min. MIL-HDBK-217F (25
215*115*50mm (L*W*H)
)
OTHERS
NOTE
DIMENSION
PACKING
1.2Kg; 12pcs / 14.4Kg / 0.98CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.