souriau
8525 Series
Description
Applications
• light weight version of Mil C 26482 series II
• intermateable and interchangeable with
Mil C 26482 series I and II
For all general purposes in civil aero-
nautical applications
• environmental stainless steel version
on request
• RFI shielding plug
• gold plating crimp contacts # 20, # 16, # 12
• minicoax contacts # 16
Standards
NFC 93422 - HE 302
NFL 54130 - NAS 1599
GAM T1 list
• hermetic version available
LN 29504
• Contact resistance :
Climatic
• Operating temperatures :
-55°C to +200°C (class R and N)
-55°C to +175°C (class G)
Characteristics
Mechanical
• Endurance :
- plug type 16 : 500 operations
- plug type 36 : 250 operations
environmental class
≤ 1 mΩ
hermetic class
≤ 7 mΩ
≤ 3,8 mΩ
size 20
size 16
size 12
≤ 0,55 mΩ
≤ 0,35 mΩ
≤ 2,4 mΩ
• Damp heat :
56 days
• Insulation resistance :
≥ 5000 MΩ at 500 Vdc
• Shock : as per NFC 93422 - HE 302
• Salt spray :
48 hours
• Dielectric withstanding voltage 2 classes :
services I and II
• Vibrations :
from 10 to 2000 Hz - acceleration : 20 G
• Leakage :
Service
at ground
at 21000 m
I
II
environmental version
- low pressure immersion : 33 mbar
hermetic version
• Contact retention in insert :
1500 Vrms
375 Vrms
2300 Vrms
550 Vrms
- size 20 :90 N
- size 12 :136 N
size 16 : 115 N
- differential pressure of 1 bar air/helium,
• Shell continuity with plug type 36 :
- environmental receptacle ≤ 5 mΩ
- hermetic receptacle ≤ 50 mΩ
Electrical
• Max current rating per contact :
leakage is ≤ 2,8 mm3 / hr
environmental class
hermetic class
• Resistance to fluids :
- fuel : Air 3405
- hydraulic fluid : Oronite M2V
- lubricant : Air 3517
size 20
size 16
size 12
7,5 A
13 A
23 A
5 A
10 A
17 A
Ordering information
sealed connectors aluminium version
basic series
8525 - 10 R 18 B 32 P
N
H •••
shell type :
plating :
10 - square flange receptacle
17 - jam nut receptacle
16 - plug
36 - RFI shielded plug
R
N
G
- black anodized (non conductive plating)
- nickel (conductive plating)
- yellow cadmium (conductive plating)
contact layout :
contact type :
- see table p 44
P
S
- male contact
- female contact
orientation :
N
- normal
W, X, Y, Z - see table p 45
obligatory suffix : H - 3 rear teeth at 120 degrees
K
- rear teeth over 360 degrees
specification :
- connector supplied without backshell, without specification
- connector supplied without contact
L
008 - connector supplied with special contacts # 20 for 0.38 to 0.93 mm2 cable or # 16 for 0.93 to 1.91 mm2 cable
068 - mixed contact layouts (# 20 and # 16)
connector supplied with special contacts # 20 for 0.38 to 0.93 mm2 cable, and standard contacts # 16
009 - receptacle 10 or 17 with straight spills contacts size 20 - Ø 0.60 mm - size 16 - Ø 1.00 mm - length max 7.30 mm
connector supplied with backshells
001 - backnut
007 - backshell for heatshrink sleeving
057 - backnut for heatshrink sleeving
012 - straight cable clamp*
017 - backshell for heatshrink sleeving*
018 - backshell for solder shield termination*
002 - straight cable clamp
003 - elbow cable clamp
011 - backnut*
013 - elbow cable clamp*
*Connector supplied with special contacts (large barrel)
40