SN75LVDS32, SN75LVDS9637
HIGH-SPEED DIFFERENTIAL LINE RECEIVERS
SLLS360A – JUNE 1999 – REVISED MARCH 2000
SN75LVDS32D (Marked as 75LVDS32)
Meets or Exceeds the Requirements of
ANSI TIA/EIA-644 Standard
(TOP VIEW)
Operates With a Single 3.3-V Supply
1B
1A
V
CC
1
2
3
4
5
6
7
8
16
15
14
13
12
Designed for Signaling Rate of Up To
155 Mbps
4B
4A
4Y
G
1Y
G
Differential Input Thresholds ±100 mV Max
2Y
Low-Voltage TTL (LVTTL) Logic Output
Levels
2A
11 3Y
10 3A
2B
Open-Circuit Fail Safe
GND
9
3B
Characterized For Operation From
0°C to 70°C
SN75LVDS9637D (Marked as DF637 or 7L9637)
(TOP VIEW)
description
V
1A
1B
2A
2B
1
2
3
4
8
7
6
5
CC
1Y
The SN75LVDS32 and SN75LVDS9637 are
differential line receivers that implement the
electricalcharacteristicsoflow-voltagedifferential
signaling (LVDS). This signaling technique lowers
the output voltage levels of 5-V differential
standard levels (such as EIA/TIA-422B) to reduce
the power, increase the switching speeds, and
2Y
GND
allow operation with a 3.3-V supply rail. Any of the four differential receivers provides a valid logical output state
with a ±100 mV allow operation with a differential input voltage within the input common-mode voltage range.
The input common-mode voltage range allows 1 V of ground potential difference between two LVDS nodes.
The intended application of these devices and signaling technique is both point-to-point and multidrop (one
driver and multiple receivers) data transmission over controlled impedance media of approximately 100 Ω. The
transmission media may be printed-circuit board traces, backplanes, or cables. The ultimate rate and distance
of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the
environment.
The SN75LVDS32 and SN75LVDS9637 are characterized for operation from 0°C to 70°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1999, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265