5秒后页面跳转
捷配首页

Datasheet > SN75LP196DWR
SN75LP196DWR PDF预览

SN75LP196DWR

更新时间： 2024-11-19 15:52:27
品牌 Logo 应用领域
德州仪器 - TI 驱动光电二极管接口集成电路驱动器
页数 文件大小 规格书
8页 111K
描述
TRIPLE LINE TRANSCEIVER, PDSO20, GREEN, PLASTIC, SOIC-20

阅读下载

中文翻译

获取价格

SN75LP196DWR 技术参数

是否无铅： 不含铅是否Rohs认证： 符合
生命周期：Obsolete零件包装代码：SOIC
包装说明：SOP, SOP20,.4针数：20
Reach Compliance Code：unknownECCN代码：EAR99
HTS代码：8542.39.00.01Factory Lead Time：1 week
风险等级：8.35其他特性：ALSO REQUIRES -9 TO -15 SUPPLY
差分输出：NO驱动器位数：5
高电平输入电流最大值：0.000001 A输入特性：SCHMITT TRIGGER
接口集成电路类型：LINE TRANSCEIVER接口标准：EIA-232-F; TIA-232-F; V.28
JESD-30 代码：R-PDSO-G20JESD-609代码：e4
长度：12.8 mm湿度敏感等级：1
标称负供电电压：-12 V功能数量：3
端子数量：20最高工作温度：70 °C
最低工作温度：最小输出摆幅：10 V
最大输出低电流：0.002 A封装主体材料：PLASTIC/EPOXY
封装代码：SOP封装等效代码：SOP20,.4
封装形状：RECTANGULAR封装形式：SMALL OUTLINE
峰值回流温度（摄氏度）：260电源：5,+-9/+-12 V
认证状态：Not Qualified最大接收延迟：900 ns
接收器位数：3座面最大高度：2.65 mm
子类别：Line Driver or Receivers最大供电电压：5.25 V
最小供电电压：4.75 V标称供电电压：5 V
电源电压1-最大：15 V电源电压1-分钟：9 V
电源电压1-Nom：12 V表面贴装：YES
技术：BIPOLAR温度等级：COMMERCIAL
端子面层：Nickel/Palladium/Gold (Ni/Pd/Au)端子形式：GULL WING
端子节距：1.27 mm端子位置：DUAL
处于峰值回流温度下的最长时间：NOT SPECIFIED最大传输延迟：1600 ns
宽度：7.5 mmBase Number Matches：1

SN75LP196DWR 数据手册

 浏览型号SN75LP196DWR的Datasheet PDF文件第2页浏览型号SN75LP196DWR的Datasheet PDF文件第3页浏览型号SN75LP196DWR的Datasheet PDF文件第4页浏览型号SN75LP196DWR的Datasheet PDF文件第5页浏览型号SN75LP196DWR的Datasheet PDF文件第6页浏览型号SN75LP196DWR的Datasheet PDF文件第7页 
SN75LP196  
LOW-POWER MULTIPLE RS-232 DRIVERS AND RECEIVERS  
SLLS294A – APRIL 1998 – REVISED JUNE 1999  
DB, DW, N, OR PW PACKAGE  
Single-Chip RS-232 Interface for an  
External Modem or Other Computer  
Peripheral Serial Port  
(TOP VIEW)  
1
2
3
4
5
6
7
8
9
10  
20  
19  
18  
17  
16  
15  
14  
13  
12  
11  
V
V
DD  
CC  
Designed to Transmit and Receive 4-µs  
Pulses (Equivalent to 256 kbit/s)  
DA1  
DA2  
DA3  
RY1  
RY2  
DA4  
RY3  
DA5  
GND  
DY1  
DY2  
DY3  
RA1  
RA2  
DY4  
RA3  
DY5  
Wide Driver Supply-Voltage Range:  
4.75 V to 15 V  
Driver Output Slew Rates Are Controlled  
Internally to 30 V/µs Maximum  
Receiver Input Hysteresis . . . 1000 mV  
Typical  
V
RS-232 Bus-Pin ESD Protection Exceeds  
15 kV Using Human-Body Model (HBM)  
SS  
Five Drivers and Three Receivers Meet or  
Exceed the Requirements of TIA/EIA-232-F  
and ITU v.28 Standards  
Complements the SN75LP1185  
Designed to Replace the Industry-Standard  
SN75196 With the Same Flow-Through  
Pinout  
Package Options Include Plastic Small  
Outline (DW), Shrink Small-Outline (DB),  
Thin Shrink Small-Outline (PW), and  
Dual-in-Line (N) Packages  
description  
The SN75LP196 is a low-power bipolar device containing five drivers and three receivers, with 15 kV of ESD  
protection on the bus pins with respect to each other. Bus pins are defined as those pins that tie directly to the  
serial-port connector, including GND. The pinout matches the flow-through design of the industry-standard  
SN75196 and allows easy interconnection of the UART and serial-port connector of the IBM PC/AT and  
compatibles. This device provides a rugged, low-cost solution for this function with the combination of bipolar  
processing and 15-kV ESD protection.  
The SN75LP196 has internal slew-rate control to provide a maximum rate of change in the output signal of  
30 V/µs. The driver output swing is clamped nominally at ±6 V to enable the higher data rates associated with  
this device and to reduce EMI emissions. Even though the driver outputs are clamped, they can handle voltages  
up to ±15 V without damage. All the logic inputs can accept 3.3-V or 5-V input signals.  
The SN75LP196 complies with the requirements of the TIA/EIA-232-F and the ITU v.28 standards. These  
standards are for data interchange between a host computer and peripheral at signaling rates up to 20 kbit/s.  
The switching speeds of the SN75LP196 support rates up to 256 kbit/s with lower capacitive loads (shorter  
cables).  
The SN75LP196 is characterized for operation from 0°C to 70°C.  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
PC/AT is a trademark of IBM Corporation.  
Copyright 1999, Texas Instruments Incorporated  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of Texas Instruments  
standard warranty. Production processing does not necessarily include  
testing of all parameters.  
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
12345678

中文翻译

下载PDF

与SN75LP196DWR相关器件

型号 品牌 获取价格 描述 数据表
SN75LP196DWRG4 TI

获取价格

 		TRIPLE LINE TRANSCEIVER, PDSO20, GREEN, PLASTIC, SOIC-20
SN75LP196N TI

获取价格

 		LOW-POWER MULTIPLE RS-232 DRIVERS AND RECEIVERS
SN75LP196PW TI

获取价格

 		LOW-POWER MULTIPLE RS-232 DRIVERS AND RECEIVERS
SN75LP196PWLE TI

获取价格

 		TRIPLE LINE TRANSCEIVER, PDSO20, TSSOP-20
SN75LP196PWR TI

获取价格

 		暂无描述
SN75LP196PWRE4 TI

获取价格

 		TRIPLE LINE TRANSCEIVER, PDSO20, GREEN, PLASTIC, TSSOP-20
SN75LPE1185CDBR TI

获取价格

 		LINE TRANSCEIVER, PDSO24
SN75LPE1185CDBRR TI

获取价格

 		LINE TRANSCEIVER, PDSO24
SN75LPE1185CN TI

获取价格

 		LINE TRANSCEIVER, PDIP24
SN75LPE1185CPWR TI

获取价格

 		LINE TRANSCEIVER, PDSO24

与SN75LP196DWR相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证