SN75ALS197
QUADRUPLE DIFFERENTIAL LINE RECEIVER
SLLS045B – JANUARY 1989 – REVISED MAY 1995
D OR N PACKAGE
(TOP VIEW)
Meets or Exceeds the Requirements of ITU
Recommendations V.10, V.11, X.26, and
X.27
V
1B
1A
1
2
3
4
5
6
7
8
16
15
14
CC
Designed for Multipoint Bus Transmission
on Long Bus Lines in Noisy Environments
4B
4A
1Y
Designed to Operate Up to 20 Mbaud
3-State Outputs
13 4Y
G
12
11
10
9
G
2Y
3Y
3A
3B
2A
Common-Mode Input Voltage Range
– 7 V to 7 V
2B
GND
Input Sensitivity . . . ±300 mV
Input Hysteresis . . . 120 mV Typ
High-Input Impedance . . . 12 kΩ Min
Operates from Single 5-V Supply
Low Supply-Current Requirement
35 mA Max
Improved Speed and Power Consumption
Compared to AM26LS32A
description
The SN75ALSI97 is a monolithic, quadruple line receiver with 3-state outputs designed using advanced,
low-power, Schottky technology. This technology provides combined improvements in bar design, tooling
production, and wafer fabrication. This, in turn, provides significantly lower power requirements and permits
much higher data throughput than other designs. The device meets the specifications of ITU Recommendations
V.10, V.11, X.26, and X.27. It features 3-state outputs that permit direct connection to a bus-organized system
with a fail-safe design that ensures the outputs will always be high if the inputs are open.
The device is optimized for balanced, multipoint bus transmission at rates up to 20 megabits per second. The
input features high-input impedance, input hysteresis for increased noise immunity, and an input sensitivity of
±300 mV over a common-mode input voltage range of –7 V to 7 V. It also features active-high and active-low
enablefunctionsthatarecommontothefourchannels. TheSN75ALS197isdesignedforoptimumperformance
when used with the SN75ALS192 quadruple differential line driver.
The SN75ALS197 is characterized for operation from 0°C to 70°C.
FUNCTION TABLE
(each receiver)
ENABLES
DIFFERENTIAL INPUTS
A–B
OUTPUT
Y
G
G
H
X
X
L
H
H
V
ID
≥ 0.3 V
H
X
X
L
?
?
– 0.3 V < V < 0.3 V
ID
H
X
X
L
L
L
V
ID
≤ – 0.3 V
X
L
H
Z
H
X
X
L
H
H
Open
H = high level, L = low level, X = irrelevant, ? = indeterminate,
Z = high impedance (off)
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1995, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265