SN75146
DUAL DIFFERENTIAL LINE RECEIVER
SLLS015B – FEBRUARY 1986 – REVISED MAY 1995
D OR P PACKAGE
(TOP VIEW)
Meets or Exceeds the Requirements of
ANSI EIA/TIA-422-B and -423-B
Meets or Exceeds the Requirements of
ANSI EIA/TIA-232-E and ITU
Recommendation V.28 With External
Components
V
1IN+
1IN–
2IN+
2IN–
1
2
3
4
8
7
6
5
CC
1OUT
2OUT
GND
Meets Federal Standards 1020 and 1030
Built-in 5-MHz Low-Pass Filter
Operates From Single 5-V Power Supply
Wide Common-Mode Voltage Range
High Input Impedance
THE SN75146 IS NOT RECOMMENDED
FOR NEW DESIGNS.
TTL-Compatible Outputs
8-Pin Dual-in-Line Package
Pinout Compatible With the µA9637 and
µA9639
description
The SN75146 is a dual differential line receiver designed to meet ANSI Standards EIA/TIA-422-B and -423-B.
The receiver is designed to have a constant impedance with input voltages of ±3 V to ±25 V allowing it to meet
the requirements of EIA/TIA-232-E and ITU recommendation V.28 with the addition of an external bias resistor.
This receiver is designed for low-speed operation below 355 kHz and has a built-in 5-MHz low-pass filter to
attenuate high-frequency noise. The inputs are compatible with either a single-ended or a differential line
system and the outputs are TTL compatible. This device operates from a single 5-V power supply and is
supplied in both the 8-pin dual-in-line and small-outline packages.
The SN75146 is characterized for operation from 0°C to 70°C.
†
logic symbol
logic diagram
8
7
1IN+
1IN–
2
3
8
7
6
5
1OUT
2OUT
1IN+
1IN–
2IN+
2IN–
2
3
1OUT
2OUT
6
5
2IN+
2IN–
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and
IEC Publication 617-12.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 1995, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265