SN74LVCZ245A
OCTAL BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
SCES275B – JUNE 1999 – REVISED JANUARY 2000
DB, DGV, DW, OR PW PACKAGE
(TOP VIEW)
EPIC (Enhanced-Performance Implanted
CMOS) Submicron Process
Typical V
<0.8 V at V
(Output Ground Bounce)
OLP
CC
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
DIR
A1
V
CC
= 3.3 V, T = 25°C
A
OE
B1
B2
B3
B4
B5
B6
B7
B8
Typical V
(Output V
Undershoot) >2 V
A2
OHV
OH
at V
= 3.3 V, T = 25°C
CC
A
A3
I
and Power-Up 3-State Support Hot
A4
off
Insertion
A5
A6
Supports Mixed-Mode Signal Operation on
All Ports (5-V Input/Output Voltage With
A7
A8
3.3-V V
)
CC
GND
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
Package Options Include Shrink
Small-Outline (DB), Plastic Thin Very
Small-Outline (DGV), Small-Outline (DW),
and Thin Shrink Small-Outline (PW)
Packages
description
This octal bus transceiver is designed for 2.7-V to 3.6-V V
operation.
CC
The SN74LVCZ245A is designed for asynchronous communication between data buses. The device transmits
data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the
direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so the buses are
effectively isolated.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators
in a mixed 3.3-V/5-V system environment.
When V
is between 0 and 1.5 V, the device is in the high-impedance state during power up or power down.
CC
However, to ensure the high-impedance state above 1.5 V, OE should be tied to V
the minimum value of the resistor is determined by the current-sinking capability of the driver.
through a pullup resistor;
CC
This device is fully specified for hot-insertion applications using I and power-up 3-state. The I circuitry
off
off
disables the outputs, preventing damaging current backflow through the device when it is powered down. The
power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down,
which prevents driver conflict.
The SN74LVCZ245A is characterized for operation from –40°C to 85°C.
FUNCTION TABLE
INPUTS
OPERATION
OE
L
DIR
L
B data to A bus
A data to B bus
Isolation
L
H
H
X
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments Incorporated.
Copyright 2000, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265