SN74LVCH32373A
32-BIT TRANSPARENT D-TYPE LATCH
WITH 3-STATE OUTPUTS
SCAS618A – OCTOBER 1998 – REVISED JUNE 1999
Member of the Texas Instruments
Widebus Family
Bus Hold on Data Inputs Eliminates the
Need for External Pullup/Pulldown
Resistors
EPIC (Enhanced-Performance Implanted
CMOS) Submicron Process
ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
Typical V
< 0.8 V at V
(Output Ground Bounce)
OLP
= 3.3 V, T = 25°C
CC
A
Latch-Up Performance Exceeds 250 mA Per
JESD 17
Typical V
> 2 V at V
(Output V
Undershoot)
OHV
CC
OH
= 3.3 V, T = 25°C
A
Packaged in Plastic Fine-Pitch Ball Grid
Array Package
Power Off Disables Outputs, Permitting
Live Insertion
Supports Mixed-Mode Signal Operation
(5-V Input and Output Voltages With
3.3-V V
)
CC
description
This 32-bit transparent D-type latch is designed for 1.65-V to 3.6-V V
operation.
CC
The SN74LVCH32373A is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus
drivers, and working registers. It can be used as four 8-bit latches, two 16-bit latches, or one 32-bit latch. When
the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs
are latched at the levels set up at the D inputs.
A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high
or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive
thebuslinessignificantly. Thehigh-impedancestateandincreaseddriveprovidethecapabilitytodrivebuslines
without interface or pullup components.
OE does not affect internal operations of the latch. Old data can be retained or new data can be entered while
the outputs are in the high-impedance state.
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators
in a mixed 3.3-V/5-V system environment.
To ensure the high-impedance state during power up or power down, OE should be tied to V through a pullup
CC
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
The SN74LVCH32373A is characterized for operation from –40°C to 85°C.
FUNCTION TABLE
INPUTS
OUTPUT
Q
OE
L
LE
H
H
L
D
H
L
H
L
L
L
X
X
Q
0
H
X
Z
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC and Widebus trademarks of Texas Instruments Incorporated.
Copyright 1999, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265