Datasheet > 逻辑 > 总线驱动器/收发器> SN74LVC574ADB

SN74LVC574ADB

更新时间： 2024-11-03 22:36:59

品牌	Logo	应用领域
德州仪器 - TI		触发器输出元件
页数	文件大小	规格书
9页	144K
描述
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

SN74LVC574ADB 数据手册

SN54LVC574A, SN74LVC574A

OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS

WITH 3-STATE OUTPUTS

SCAS301J – JANUARY 1993 – REVISED JULY 1998

SN54LVC574A . . . J OR W PACKAGE

SN74LVC574A . . . DB, DW, OR PW PACKAGE

(TOP VIEW)

EPIC (Enhanced-Performance Implanted

CMOS) Submicron Process

Typical V

< 0.8 V at V

(Output Ground Bounce)

OLP

= 3.3 V, T = 25°C

Typical V

> 2 V at V

(Output V

Undershoot)

OHV

18 2Q

17 3Q

16 4Q

= 3.3 V, T = 25°C

Support Mixed-Mode Signal Operation on

All Ports (5-V Input/Output Voltage With

CLK

3.3-V V

)

Power Off Disables Outputs, Permitting

Live Insertion

ESD Protection Exceeds 2000 V Per

MIL-STD-883, Method 3015; Exceeds 200 V

Using Machine Model (C = 200 pF, R = 0)

GND

SN54LVC574A . . . FK PACKAGE

(TOP VIEW)

Latch-Up Performance Exceeds 250 mA Per

JESD 17

Package Options Include Plastic

Small-Outline (DW), Shrink Small-Outline

(DB), Thin Shrink Small-Outline (PW), and

Ceramic Flat (W) Packages, Ceramic Chip

Carriers (FK), and DIPs (J)

2 1 20 19

description

9 10 11 12 13

The SN54LVC574A octal edge-triggered D-type

flip-flop is designed for 2.7-V to 3.6-V V

operation and the SN74LVC574A octal

edge-triggered D-type flip-flop is designed for

1.65-V to 3.6-V V

operation.

These devices feature 3-state outputs designed specifically for driving highly capacitive or relatively

low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional

bus drivers, and working registers.

On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels at the data (D) inputs.

A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high

or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive

the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus

lines without interface or pullup components.

OE does not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered

while the outputs are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE should be tied to V through a pullup

resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators

in a mixed 3.3-V/5-V system environment.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

EPIC is a trademark of Texas Instruments Incorporated.

On products compliant to MIL-PRF-38535, all parameters are tested

unless otherwise noted. On all other products, production

processing does not necessarily include testing of all parameters.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of Texas Instruments

standard warranty. Production processing does not necessarily include

testing of all parameters.

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

12 3 4 5 6 7...9

中文翻译

下载PDF

与SN74LVC574ADB相关器件

型号	品牌	获取价格	描述	数据表
SN74LVC574ADBLE	TI	获取价格	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
SN74LVC574ADBR	TI	获取价格	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
SN74LVC574ADBRE4	TI	获取价格	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
SN74LVC574ADBRG4	TI	获取价格	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
SN74LVC574ADGVR	TI	获取价格	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
SN74LVC574ADGVRE4	TI	获取价格	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
SN74LVC574ADGVRG4	TI	获取价格	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
SN74LVC574ADW	TI	获取价格	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
SN74LVC574ADWE4	TI	获取价格	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
SN74LVC574ADWG4	TI	获取价格	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS

与SN74LVC574ADB相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

13
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

7
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

35
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

31

产品中心

服务支持

精选活动

关于我们

帮助中心

SN74LVC574ADB

SN74LVC574ADB 数据手册

与SN74LVC574ADB相关器件

与SN74LVC574ADB相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

SN74LVC574ADB

SN74LVC574ADB 数据手册

与SN74LVC574ADB相关器件

与SN74LVC574ADB相关文章

您还可以找

您在本页遇到什么问题？