5秒后页面跳转
SN74LVC245AIPWREP PDF预览

SN74LVC245AIPWREP

更新时间: 2024-11-26 12:47:03
品牌 Logo 应用领域
德州仪器 - TI 总线收发器输出元件
页数 文件大小 规格书
13页 496K
描述
OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS

SN74LVC245AIPWREP 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:TSSOP
包装说明:TSSOP, TSSOP20,.25针数:20
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01Factory Lead Time:6 weeks
风险等级:0.79控制类型:COMMON CONTROL
计数方向:BIDIRECTIONAL系列:LVC/LCX/Z
JESD-30 代码:R-PDSO-G20JESD-609代码:e4
长度:6.5 mm逻辑集成电路类型:BUS TRANSCEIVER
最大I(ol):0.024 A湿度敏感等级:1
位数:8功能数量:1
端口数量:2端子数量:20
最高工作温度:85 °C最低工作温度:-40 °C
输出特性:3-STATE输出极性:TRUE
封装主体材料:PLASTIC/EPOXY封装代码:TSSOP
封装等效代码:TSSOP20,.25封装形状:RECTANGULAR
封装形式:SMALL OUTLINE, THIN PROFILE, SHRINK PITCH包装方法:TR
峰值回流温度(摄氏度):260电源:3.3 V
最大电源电流(ICC):0.01 mAProp。Delay @ Nom-Sup:6.3 ns
传播延迟(tpd):12.7 ns认证状态:Not Qualified
施密特触发器:No座面最大高度:1.2 mm
子类别:Bus Driver/Transceivers最大供电电压 (Vsup):3.6 V
最小供电电压 (Vsup):1.65 V标称供电电压 (Vsup):1.8 V
表面贴装:YES技术:CMOS
温度等级:INDUSTRIAL端子面层:Nickel/Palladium/Gold (Ni/Pd/Au)
端子形式:GULL WING端子节距:0.65 mm
端子位置:DUAL处于峰值回流温度下的最长时间:NOT SPECIFIED
翻译:N/A宽度:4.4 mm
Base Number Matches:1

SN74LVC245AIPWREP 数据手册

 浏览型号SN74LVC245AIPWREP的Datasheet PDF文件第2页浏览型号SN74LVC245AIPWREP的Datasheet PDF文件第3页浏览型号SN74LVC245AIPWREP的Datasheet PDF文件第4页浏览型号SN74LVC245AIPWREP的Datasheet PDF文件第5页浏览型号SN74LVC245AIPWREP的Datasheet PDF文件第6页浏览型号SN74LVC245AIPWREP的Datasheet PDF文件第7页 
SN74LVC245A-EP  
OCTAL BUS TRANSCEIVER  
WITH 3-STATE OUTPUTS  
www.ti.com  
SCAS741BDECEMBER 2003REVISED AUGUST 2005  
FEATURES  
Controlled Baseline  
ESD Protection Exceeds JESD 22  
– One Assembly/Test Site, One Fabrication  
Site  
– 2000-V Human-Body Model (A114-A)  
– 1000-V Charged-Device Model (C101)  
Enhanced Diminishing Manufacturing  
Sources (DMS) Support  
PW PACKAGE  
(TOP VIEW)  
Enhanced Product-Change Notification  
(1)  
1
2
3
4
5
6
7
8
9
10  
20  
19  
18  
17  
16  
15  
14  
13  
12  
11  
Qualification Pedigree  
DIR  
A1  
A2  
V
CC  
OE  
B1  
B2  
B3  
B4  
B5  
B6  
B7  
B8  
Operates From 1.65 V to 3.6 V  
Inputs Accept Voltages to 5.5 V  
Max tpd of 6.3 ns at 3.3 V  
A3  
A4  
Typical VOLP (Output Ground Bounce) <0.8 V  
at VCC = 3.3 V, TA = 25°C  
A5  
A6  
A7  
Typical VOHV (Output VOH Undershoot) >2 V at  
VCC = 3.3 V, TA = 25°C  
A8  
GND  
Ioff Supports Partial-Power-Down Mode  
Operation  
Supports Mixed-Mode Signal Operation on All  
Ports (5-V Input/Output Voltage With 3.3-V  
VCC  
)
Latch-Up Performance Exceeds 250 mA Per  
JESD 17  
(1) Component qualification in accordance with JEDEC and  
industry standards to ensure reliable operation over an  
extended temperature range. This includes, but is not limited  
to, Highly Accelerated Stress Test (HAST) or biased 85/85,  
temperature cycle, autoclave or unbiased HAST,  
electromigration, bond intermetallic life, and mold compound  
life. Such qualification testing should not be viewed as  
justifying use of this component beyond specified  
performance and environmental limits.  
DESCRIPTION/ORDERING INFORMATION  
This octal bus transceiver is designed for 1.65-V to 3.6-V VCC operation.  
The SN74LVC245A is designed for asynchronous communication between data buses. The device transmits  
data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the  
direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so the buses are  
effectively isolated.  
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup  
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.  
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of this device as a translator in  
a mixed 3.3-V/5-V system environment.  
ORDERING INFORMATION  
TA  
PACKAGE(1)  
ORDERABLE PART NUMBER  
TOP-SIDE MARKING  
–40°C to 85°C  
TSSOP – PW  
Reel of 2000  
SN74LVC245AIPWREP  
C245AEP  
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at  
www.ti.com/sc/package.  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas  
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
PRODUCTION DATA information is current as of publication date.  
Copyright © 2003–2005, Texas Instruments Incorporated  
Products conform to specifications per the terms of the Texas  
Instruments standard warranty. Production processing does not  
necessarily include testing of all parameters.  

SN74LVC245AIPWREP 替代型号

型号 品牌 替代类型 描述 数据表
SN74LVCH245APWR TI

类似代替

OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
SN74LVCH245APW TI

类似代替

OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
SN74LVC245APW TI

类似代替

OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS

与SN74LVC245AIPWREP相关器件

型号 品牌 获取价格 描述 数据表
SN74LVC245AN TI

获取价格

OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS
SN74LVC245ANE4 TI

获取价格

OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS
SN74LVC245ANSR TI

获取价格

OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS
SN74LVC245ANSRE4 TI

获取价格

OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS
SN74LVC245ANSRG4 TI

获取价格

OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS
SN74LVC245APW TI

获取价格

OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS
SN74LVC245APWE4 TI

获取价格

OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS
SN74LVC245APWG4 TI

获取价格

OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS
SN74LVC245APWLE TI

获取价格

OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS
SN74LVC245APWR TI

获取价格

OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS