SN74CB3Q16811
24-BIT SWITCH WITH PRECHARGED OUTPUTS
2.5-V/3.3-V LOW-VOLTAGE FET BUS SWITCH
www.ti.com
SCDS153B–OCTOBER 2003–REVISED MARCH 2005
FEATURES
•
Data and Control Inputs Provide Undershoot
Clamp Diodes
•
•
•
•
Member of the Texas Instruments Widebus™
Family
•
•
•
Low Power Consumption (ICC = 0.75 mA Typ)
VCC Operating Range From 2.3 V to 3.6 V
SN74CB3Q Bus Switches Are Equivalent to
IDTQS3VH Bus Switches
Data I/Os Support 0- to 5-V Signaling Levels
(0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V, 5 V)
5-V Tolerant I/Os With Device Powered Up or
Powered Down
•
•
•
•
Control Inputs Can Be Driven by TTL or
5-V/3.3-V CMOS Outputs
Low and Flat ON-State Resistance (ron)
Characteristics Over Operating Range
(ron = 5 Ω Typ)
Ioff Supports Partial-Power-Down Mode
Operation
•
•
Rail-to-Rail Switching on Data I/O Ports
– 0- to 5-V Switching With 3.3-V VCC
– 0- to 3.3-V Switching With 2.5-V VCC
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Performance Tested Per JESD 22
B-Port Outputs Are Precharged by Bias
Voltage (BIASV) to Minimize Signal Distortion
During Live Insertion and Hot Plugging
– 2000-V Human-Body Model
(A114-B, Class II)
– 1000-V Charged-Device Model (C101)
•
•
Supports PCI Hot Plug
•
Supports Both Digital and Analog
Applications: PCI Hot Plug, Hot Docking,
Memory Interleaving, Bus Isolation, and
Low-Distortion Signal Gating
Bidirectional Data Flow With Near-Zero
Propagation Delay
•
Low Input/Output Capacitance Minimizes
Loading and Signal Distortion
(Cio(OFF) = 4 pF Typ)
•
Fast Switching Frequency (fON = 20 MHz Max)
DESCRIPTION/ORDERING INFORMATION
The SN74CB3Q16811 is a high-bandwidth FET bus switch utilizing a charge pump to elevate the gate voltage of
the pass transistor, providing a low and flat ON-state resistance (ron). The low and flat ON-state resistance allows
for minimal propagation delay and supports rail-to-rail switching on the data input/output (I/O) ports. The device
also features low data I/O capacitance to minimize capacitive loading and signal distortion on the data bus.
Specifically designed to support high-bandwidth applications, the SN74CB3Q16811 provides an optimized
interface solution ideally suited for broadband communications, networking, and data-intensive computing
systems.
ORDERING INFORMATION
TA
PACKAGE(1)
ORDERABLE PART NUMBER
SN74CB3Q16811DL
TOP-SIDE MARKING
CB3Q16811
Tube
SSOP – DL
Tape and reel
Tape and reel
Tape and reel
SN74CB3Q16811DLR
–40°C to 85°C
TSSOP – DGG
TVSOP – DGV
SN74CB3Q16811DGGR
SN74CB3Q16811DGVR
CB3Q16811
BW811
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
DESCRIPTION/ORDERING INFORMATION (CONTINUED)
The SN74CB3Q16811 is organized as two 12-bit bus switches with separate output-enable (1OE, 2OE) inputs. It
can be used as two 12-bit bus switches or as one 24-bit bus switch. When OE is low, the associated 12-bit bus
switch is ON, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE
is high, the associated 12-bit bus switch is OFF, and a high-impedance state exists between the A and B ports.
The B port is precharged to bias voltage (BIASV) through the equivalent of a 10-kΩ resistor when OE is high or if
the device is powered down (VCC = 0 V).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Widebus is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Copyright © 2003–2005, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.