SN74ALVCH16823
18-BIT BUS-INTERFACE FLIP-FLOP
WITH 3-STATE OUTPUTS
SCES038D – JULY 1995 – REVISED FEBRUARY 1999
DGG OR DL PACKAGE
(TOP VIEW)
Member of the Texas Instruments
Widebus Family
EPIC (Enhanced-Performance Implanted
CMOS) Submicron Process
1CLR
1OE
1Q1
GND
1Q2
1Q3
1CLK
1CLKEN
1D1
GND
1D2
1
56
55
54
53
52
51
50
49
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
2
ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
3
4
5
Latch-Up Performance Exceeds 250 mA Per
JESD 17
1D3
6
V
V
7
CC
CC
1Q4
1Q5
1Q6
GND
1Q7
1Q8
1Q9
2Q1
2Q2
2Q3
GND
2Q4
2Q5
2Q6
1D4
1D5
1D6
GND
1D7
1D8
1D9
2D1
2D2
2D3
GND
2D4
2D5
2D6
8
Bus Hold on Data Inputs Eliminates the
Need for External Pullup/Pulldown
Resistors
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Package Options Include Plastic 300-mil
Shrink Small-Outline (DL) and Thin Shrink
Small-Outline (DGG) Packages
description
This 18-bit bus-interface flip-flop is designed for
1.65-V to 3.6-V V operation.
CC
The SN74ALVCH16823 features 3-state outputs
designed specifically for driving highly capacitive
or relatively low-impedance loads. This device is
particularly suitable for implementing wider buffer
registers, I/O ports, bidirectional bus drivers with
parity, and working registers.
V
V
CC
CC
2Q7
2Q8
GND
2Q9
2OE
2CLR
2D7
2D8
GND
2D9
2CLKEN
2CLK
The SN74ALVCH16823 can be used as two 9-bit
flip-flops or one 18-bit flip-flop. With the
clock-enable (CLKEN) input low, the D-type
flip-flops enter data on the low-to-high transitions
of the clock. Taking CLKEN high disables the
clock buffer, thus latching the outputs. Taking the
clear (CLR) input low causes the Q outputs to go
low independently of the clock.
A buffered output-enable (OE) input can be used to place the nine outputs in either a normal logic state (high
or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive
thebuslinessignificantly. Thehigh-impedancestateandincreaseddriveprovidethecapabilitytodrivebuslines
without need for interface or pullup components.
The output-enable (OE) input does not affect the internal operation of the flip-flops. Old data can be retained
or new data can be entered while the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to V through a pullup
CC
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.
The SN74ALVCH16823 is characterized for operation from –40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC and Widebus are trademarks of Texas Instruments Incorporated.
Copyright 1999, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265