SN65MLVD201, SN65MLVD203
SN65MLVD206, SN65MLVD207
www.ti.com
SLLS558A– DECEMBER 2002 – JUNE 2003
MULTIPOINT-LVDS LINE DRIVER AND RECEIVER
D
D
D
D
Backplane or Cabled Multipoint Data and
Clock Transmission
FEATURES
D
Low-Voltage Differential 30-Ω to 55-Ω Line
Drivers and Receivers for Signaling Rates
Up to 200 Mbps
Cellular Base Stations
(1)
Central-Office Switches
Network Switches and Routers
D
D
Type-1 Receivers Incorporate 25 mV of
Hysteresis
DESCRIPTION
Type-2 Receivers Provide an Offset
(100 mV) Threshold to Detect Open-Circuit
and Idle-Bus Conditions
The SN65MLVD201, 203, 206, and 207 are
multipoint-low-voltage differential (M-LVDS) line drivers
and receivers, which are optimized to operate at signaling
rates up to 200 Mbps. All parts comply with the multipoint
low-voltage differential signaling (M–LVDS) standard
TIA/EIA-899. These circuits are similar to their
TIA/EIA-644 standard compliant LVDS counterparts, with
added features to address multipoint applications. The
driver output has been designed to support multipoint
buses presenting loads as low as 30 Ω, and incorporates
controlled transition times to allow for stubs off of the
backbone transmission line.
D
Meets or Exceeds the M-LVDS Standard
TIA/EIA-899 for Multipoint Data Interchange
D
Power Up/Down Glitch Free
D
Controlled Driver Output Voltage Transition
Times for Improved Signal Quality
D
–1 V to 3.4 V Common-Mode Voltage Range
Allows Data Transfer With 2 V of Ground
Noise
D
D
Bus Pins High Impedance When Disabled or
These devices have Type-1 and Type-2 receivers that
detect the bus state with as little as 50 mV of differential
input voltage over a common-mode voltage range of –1 V
to 3.4 V. The Type-1 receivers exhibit 25 mV of differential
input voltage hysteresis to prevent output oscillations with
slowly changing signals or loss of input. Type-2 receivers
include an offset threshold to provide a known output state
under open-circuit, idle-bus, and other faults conditions.
The devices are characterized for operation from –40°C to
85°C.
V
≤ 1.5 V
CC
100-Mbps Devices Available
(SN65MLVD200, 202, 204, 205)
APPLICATIONS
D
Low-Power High-Speed Short-Reach
Alternative to TIA/EIA-485
LOGIC DIAGRAM (POSITIVE LOGIC)
SN65MLVD201,SN65MLVD206
SN65MLVD203,SN65MLVD207
9
3
Y
DE
5
D
DE
RE
10
Z
4
D
4
3
2
RE
R
12
11
A
B
6
7
2
A
B
1
R
Pleasebe aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
(1)
The signaling rate of a line, is the number of voltage transitions that are made per second expressed in the units bps (bits per second).
PRODUCTION DATA information is current as of publication date. Products
conform to specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all parameters.
Copyright 2002 – 2003, Texas Instruments Incorporated