SN65LVDS179-Q1, SN65LVDS180-Q1
SN65LVDS050-Q1, SN65LVDS051-Q1
www.ti.com
SGLS204B –SEPTEMBER 2003–REVISED NOVEMBER 2011
HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS
Check for Samples: SN65LVDS179-Q1, SN65LVDS180-Q1, SN65LVDS050-Q1, SN65LVDS051-Q1
1
FEATURES
•
•
Qualified for Automotive Applications
ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
•
Meets or Exceeds the Requirements of ANSI
TIA/EIA-644-1995 Standard
•
•
•
•
Signaling Rates up to 400 Mbps
Bus-Terminal ESD Exceeds 12 kV
Operates From a Single 3.3-V Supply
Low-Voltage Differential Signaling With Typical
Output Voltages of 350 mV and a 100-Ω Load
•
Propagation Delay Times
–
–
Driver: 1.7 ns Typ
Receiver: 3.7 ns Typ
•
Power Dissipation at 200 MHz
–
–
Driver: 25 mW Typical
Receiver: 60 mW Typical
•
•
LVTTL Input Levels Are 5-V Tolerant
Receiver Maintains High Input Impedance With
VCC < 1.5 V
•
Receiver Has Open-Circuit Fail Safe
DESCRIPTION
The SN65LVDS179, SN65LVDS180, SN65LVDS050,
and SN65LVDS051 are differential line drivers and
receivers that use low-voltage differential signaling
(LVDS) to achieve signaling rates as high as 400
Mbps. The TIA/EIA-644 standard compliant electrical
interface provides a minimum differential output
voltage magnitude of 247 mV into a 100-Ω load and
receipt of 50-mV signals with up to 1 V of ground
potential difference between
receiver.
a
transmitter and
The intended application of this device and signaling
technique is for point-to-point baseband data
transmission over controlled impedance media of
approximately 100-Ω characteristic impedance. The
transmission media may be printed-circuit board
traces, backplanes, or cables. (Note: The ultimate
rate and distance of data transfer is dependent upon
the attenuation characteristics of the media, the noise
coupling to the environment, and other application
specific characteristics).
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2003–2011, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.