SN65HVD30-EP, SN65HVD31-EP, SN65HVD32-EP
SN65HVD33-EP, SN65HVD34-EP, SN65HVD35-EP
www.ti.com
SGLS367D –SEPTEMBER 2006–REVISED MARCH 2012
3.3-V FULL-DUPLEX RS-485 DRIVERS AND RECEIVERS
Check for Samples: SN65HVD30-EP, SN65HVD31-EP, SN65HVD32-EP, SN65HVD33-EP, SN65HVD34-EP, SN65HVD35-EP
1
FEATURES
APPLICATIONS
•
1/8 Unit-Load Option Available (up to 256
Nodes on the Bus)
•
•
•
•
Utility Meters
DTE/DCE Interfaces
•
•
Bus-Pin ESD Protection Exceeds 15-kV HBM
Industrial, Process, and Building Automation
Point-of-Sale (POS) Terminals and Networks
Optional Driver Output Transition Times for
Signaling Rates (1) of 1 Mbps, 5 Mbps, and
25 Mbps
SUPPORTS DEFENSE, AEROSPACE,
AND MEDICAL APPLICATIONS
•
•
Low-Current Standby Mode: <1 μA
Glitch-Free Power-Up and Power-Down
Protection for Hot-Plugging Applications
•
•
•
•
Controlled Baseline
One Assembly/Test Site
One Fabrication Site
•
•
•
•
5-V-Tolerant Inputs
Bus Idle, Open, and Short-Circuit Fail Safe
Driver Current Limiting and Thermal Shutdown
Available in Military (–55°C/125°C)
Temperature Range
Meet or Exceed the Requirements of ANSI
TIA/EIA-485-A and RS-422 Compatible
•
•
•
Extended Product Life Cycle
Extended Product-Change Notification
Product Traceability
(1) The signaling rate of a line is the number of voltage
transitions that are made per second expressed in the units
bps (bits per second).
DESCRIPTION
The SN65HVD3x devices are 3-state differential line drivers and differential-input line receivers that operate with
3.3-V power supply.
Each driver and receiver has separate input and output pins for full-duplex bus communication designs. They are
designed for balanced transmission lines and interoperation with ANSI TIA/EIA-485A, TIA/EIA-422-B, ITU-T v.11,
and ISO 8482:1993 standard-compliant devices.
The SN65HVD30, SN65HVD31, and SN65HVD32 are fully enabled with no external enabling pins.
The SN65HVD33, SN65HVD34, and SN65HVD35 have active-high driver enables and active-low receiver
enables. A low (less than 1 μA) standby current can be achieved by disabling both the driver and receiver.
All devices are characterized for operation from –55°C to 125°C.
IMPROVED REPLACEMENT FOR:
Part Number
Replace With
xxx3491
xxx3490
SN65HVD33:
SN65HVD30:
Better ESD protection (15 kV vs 2 kV or not specified), higher signaling rate (25 Mbps vs 20 Mbps),
fractional unit load (64 nodes vs 32)
MAX3491E
MAX3490E
SN65HVD33:
SN65HVD30:
Higher signaling rate (25 Mbps vs 12 Mbps), fractional unit load (64 nodes vs 32)
Higher signaling rate (25 Mbps vs 16 Mbps), lower standby current (1 μA vs 10 μA)
Higher signaling rate (5 Mbps vs 500 kbps), lower standby current (1 μA vs 10 μA)
Higher signaling rate (1 Mbps vs 250 kbps), lower standby current (1 μA vs 10 μA)
MAX3076E
MAX3077E
SN65HVD33:
SN65HVD30:
MAX3073E
MAX3074E
SN65HVD34:
SN65HVD31:
MAX3070E
MAX3071E
SN65HVD35:
SN65HVD32:
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2012, Texas Instruments Incorporated