SN65HVD1780-Q1, SN65HVD1781-Q1, SN65HVD1782 -Q1
www.ti.com
SLLSE49 –SEPTEMBER 2010
Fault-Protected RS-485 Transceivers with 3.3-V to 5-V Operation
Check for Samples: SN65HVD1780-Q1, SN65HVD1781-Q1, SN65HVD1782 -Q1
These devices combine a differential driver and a
1
FEATURES
differential receiver, which operate from a single
power supply. In the 'HVD1782, the driver differential
outputs and the receiver differential inputs are
connected internally to form a bus port suitable for
half-duplex (two-wire bus) communication. This port
features a wide common-mode voltage range, making
the devices suitable for multipoint applications over
long cable runs. These devices are characterized
from –40°C to 125°C. These devices are
pin-compatible with the industry-standard SN75176
transceiver, making them drop-in upgrades in most
systems.
•
Qualified for Automotive Applications
•
Bus-Pin Fault Protection to:
–
–
> ±70 V ('HVD1780, 81)
> ±30 V ('HVD1782)
•
•
•
•
Operation With 3.3-V to 5-V Supply Range
±16 kV HBM Protection on Bus Pins
Reduced Unit Load for up to 320 Nodes
Failsafe Receiver for Open-Circuit,
Short-Circuit and Idle-Bus Conditions
•
Low Power Consumption
These devices are fully compliant with ANSI TIA/EIA
485-A with a 5-V supply and can operate with a 3.3-V
supply with reduced driver output voltage for
low-power applications. For applications where
–
–
Low Standby Supply Current, 1 mA Max
ICC 4 mA Quiescent During Operation
•
•
Pin-Compatible With Industry-Standard
SN75176
operation
common-mode
is
required
voltage
over
range,
an
extended
see
the
Signaling Rates of 115 kbps, 1 Mbps, and up
to 10 Mbps
SN65HVD1785 (SLLS872) data sheet.
DESCRIPTION
These devices are designed to survive overvoltage
faults such as direct shorts to power supplies,
mis-wiring faults, connector failures, cable crushes,
and tool mis-applications. They are also robust to
ESD events, with high levels of protection to the
human-body-model specification.
VFAULT up to 70 V
M0092-02
Transceiver
HVD1780
HVD1781
HVD1782
Signaling Rate
Number of Nodes
Up to 115 kbps
Up to 1 Mbps
Up to 10 Mbps
Up to 320
Up to 320
Up to 64
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
UNLESS OTHERWISE NOTED this document contains
Copyright © 2010, Texas Instruments Incorporated
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.