R
SN75176B/
SN65176B
UMW
SN75176B/SN65176B Multipoint RS-485/RS-422 Transceivers
FEATURES
DESCRIPTION
The SN75176B / SN65176B is a high speed differential
TRI-STATE®bus/line transceiver designed to meet the
requirements of EIA standard RS485 with extended
common mode range (+12V to −7V), for multipoint
data transmission. In addition, it is compatible with
RS-422.
•
Meets EIA Standard RS485 for Multipoint Bus
Transmission and is Compatible with RS-422.
•
Small Outline (SOIC) Package Option Available
for Minimum Board Space.
22 ns Driver Propagation Delays.
Single +5V Supply.
•
•
The driver and receiver outputs feature TRI-STATE
capability, for the driver outputs over the entire
common mode range of +12V to −7V. Bus contention
or fault situations that cause excessive power
dissipation within the device are handled by a thermal
shutdown circuit, which forces the driver outputs into
•
−7V to +12V Bus Common Mode Range
Permits ±7V Ground Difference Between
Devices on the Bus.
Thermal Shutdown Protection.
•
•
High Impedance to Bus with Driver in TRI-
STATE or with Power Off, Over the Entire
Common Mode Range Allows the Unused
Devices on the Bus to be Powered Down.
Combined Impedance of a Driver Output and
the high impedance state.
DC specifications are guaranteed over the
to
-40° 105°C
temperature and 4.75V to 5.25V supply voltage
range.
•
Receiver Input is Less Than One RS485 Unit
Load, Allowing up to 32 Transceivers on the
Bus.
•
70 mV Typical Receiver Hysteresis.
Connection and Logic Diagram
Figure 1. Top View
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
www.umw-ic.com
1
友台半导体有限公司