SN54HCT373J

更新时间： 2024-11-23 23:03:03

品牌	Logo	应用领域
德州仪器 - TI		总线驱动器总线收发器锁存器逻辑集成电路输出元件
页数	文件大小	规格书
18页	244K
描述
OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

SN54HCT373J 技术参数

生命周期：	Active	零件包装代码：	DIP
包装说明：	DIP, DIP20,.3	针数：	20
Reach Compliance Code：	not_compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	Factory Lead Time：	6 weeks
风险等级：	5.06	Is Samacsys：	N
控制类型：	ENABLE LOW	计数方向：	UNIDIRECTIONAL
系列：	HCT	JESD-30 代码：	R-GDIP-T20
长度：	24.195 mm	负载电容（CL）：	150 pF
逻辑集成电路类型：	BUS DRIVER	最大I（ol）：	0.006 A
位数：	8	功能数量：	1
端口数量：	2	端子数量：	20
最高工作温度：	125 °C	最低工作温度：	-55 °C
输出特性：	3-STATE	输出极性：	TRUE
封装主体材料：	CERAMIC, GLASS-SEALED	封装代码：	DIP
封装等效代码：	DIP20,.3	封装形状：	RECTANGULAR
封装形式：	IN-LINE	包装方法：	TUBE
峰值回流温度（摄氏度）：	NOT SPECIFIED	电源：	5 V
最大电源电流（ICC）：	0.08 mA	Prop。Delay @ Nom-Sup：	53 ns
传播延迟（tpd）：	79 ns	认证状态：	Not Qualified
座面最大高度：	5.08 mm	子类别：	FF/Latches
最大供电电压 (Vsup)：	5.5 V	最小供电电压 (Vsup)：	4.5 V
标称供电电压 (Vsup)：	5 V	表面贴装：	NO
技术：	CMOS	温度等级：	MILITARY
端子形式：	THROUGH-HOLE	端子节距：	2.54 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	NOT SPECIFIED
宽度：	7.62 mm	Base Number Matches：	1

SN54HCT373J 数据手册

AN295

USB AUDIO CLASS TUTORIAL

1. Introduction

Isochronous data transfers can be used by universal serial bus (USB) devices designed to transfer data to or from

a host at a constant rate. Systems streaming audio employ isochronous transfers to transmit audio signals in real-

time. Silicon Laboratories microcontrollers’ robust USB peripheral supports isochronous transfers, and each

family’s assortment of additional high quality peripherals make them excellent single-chip solutions for USB-based

embedded system designs.

This document contains the following:

A USB protocol overview concentrating on isochronous transfers

A Firmware Template that provides a starting point for custom USB Audio Class device firmware

An example system illustrating requirements and operation of USB Audio Class devices

1.1. Overview

The first section of this application note discusses the key points of the USB specification that must be followed by

all USB devices, as well as isochronous transfer protocol requirements. The second section introduces the

Firmware Template for USB Audio Class devices. The last section discusses an example USB Audio Class device.

The example shows an Audio Class device that streams a sine wave to the host.

2. USB, Isochronous Transfers, and the Audio Class

The USB communications protocol outlines specifications for a reliable and fast system of data transfer between a

peripheral and a host such as a PC. The protocol defines four different data transfer types (bulk, interrupt, control,

and isochronous), each with unique characteristics and uses. USB device classes employ transfer types that suit

the needs of particular applications and systems. The USB Audio class uses the isochronous transfer type to

stream audio across a USB link.

2.1. USB Operational Overview

When a USB device connects to a USB port, the host controlling the port retrieves information about the

capabilities of a device through control transfers during a process called enumeration. Devices format this

information into descriptors. USB Specification documents define the structure of descriptors.

USB devices send and receive data through endpoints. All USB devices must have one control endpoint through

which all enumeration data travels. Descriptors read during enumeration describe the device’s other endpoints,

their data flow direction, maximum packet size, transfer type, and other characteristics used after enumeration

successfully completes.

After examining the device’s descriptors, the host determines how to communicate with the device. If the host can

allocate resources (data bandwidth, power) requested by the device, then enumeration completes successfully and

the host begins operations communication with the device. During operations communications, transfer methods

such as those using isochronous endpoint transfers take place.

2.2. Isochronous Transfer Characteristics

The host guarantees bandwidth to isochronous endpoints. This bandwidth guarantee is a feature unique to

isochronous endpoints. The amount of bandwidth allocated to a particular isochronous endpoint is determined by

information requested by that endpoint’s descriptor. Data transfers take place inside USB data frames. For Full

Speed USB devices such as the Silicon Laboratories C8051F32x, a data frame spans 1 millisecond. A device can

be configured to transmit as few as 1 byte per frame or as many as 1023 bytes per frame.

Rev. 0.1 6/06

AN295

12 3 4 5 6 7...18

中文翻译

下载PDF

SN54HCT373J 替代型号

型号	品牌	替代类型	描述	数据表
JM38510/65453BRA	TI	完全替代	OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
SN74HCT373DWR	TI	类似代替	OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
SN74HCT373DW	TI	类似代替	OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS

与SN54HCT373J相关器件

型号	品牌	获取价格	描述	数据表
SN54HCT373J-00	TI	获取价格	HCT SERIES, 8-BIT DRIVER, TRUE OUTPUT, CDIP20
SN54HCT373-SP	TI	获取价格	具有三态输出的八路 D 类透明锁存器
SN54HCT373W	TI	获取价格	OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
SN54HCT374	TI	获取价格	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
SN54HCT374_07	TI	获取价格	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
SN54HCT374_08	TI	获取价格	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
SN54HCT374_16	TI	获取价格	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
SN54HCT374FH	TI	获取价格	IC,FLIP-FLOP,OCTAL,D TYPE,HCT-CMOS,LLCC,20PIN,CERAMIC
SN54HCT374FK	TI	获取价格	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS
SN54HCT374FK-00	TI	获取价格	HCT SERIES, 8-BIT DRIVER, TRUE OUTPUT, CQCC20

与SN54HCT373J相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

38
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

30
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

58
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

54

产品中心

服务支持

精选活动

关于我们

帮助中心

SN54HCT373J

SN54HCT373J 技术参数

SN54HCT373J 数据手册

SN54HCT373J 替代型号

与SN54HCT373J相关器件

与SN54HCT373J相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

SN54HCT373J

SN54HCT373J 技术参数

SN54HCT373J 数据手册

SN54HCT373J 替代型号

与SN54HCT373J相关器件

与SN54HCT373J相关文章

您还可以找

您在本页遇到什么问题？