SIL/SMT20C2 Series
4.5 Vin to 13.8 V Single Output
August 27, 2008
DC-DC CONVERTERS
C Class Non-isolated
1
• 20 A current rating
NEW Product
• Input voltage range: 4.5-13.8 V
• Output voltage: 0.59-5.1 V
• Industry leading value
• Cost optimized design
• Excellent transient response
• Output enable
• Output voltage adjustability
• Pathway for future upgrades
• Supports silicon voltage migration
• Resulting in reduced design-in and qual time
• Current sink capability
• RoHS compliant
The SIL/SMT20C2 series is a new high density, open frame, non-isolated
converter for space sensitive applications. This model has a wide input range
(4.5-13.8 Vdc) and offers a wide 0.59-5.1 V output voltage range with 20 A
load capability. An external resistor adjusts the output voltage from its pre-set
value of 0.59 V to any value up to the 5 V maximum. Typical efficiencies for
the models are 93% for the 12 V input version. The series offers remote ON/
OFF and over-current protection as standard.
2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25 °C, unless otherwise stated
SPECIFICATIONS
GENERAL SPECIFICATIONS
OUTPUT SPECIFICATIONS
Efficiency
Vin=5 V, Vo=2.5 V, lo=20 A
90%
Output voltage
(See Note 5)
0.59-5.1 V
±1.0%
Switching frequency
Fixed
750 kHz
Output setpoint
accuracy
0.1% trim resistors
Approvals and
EN60950
standards (pending)
UL/cUL6950
Line regulation
Load regulation
Min/max load
Overshoot
Low line to high line
Full load to min. load
±0.2%
±0.5%
Material flammability
Weight
UL94V-0
8.50 g/0.3 oz.
0 A/20 A
MTBF
12 V @ 40 °C
100% load
Bellcore 332
6,721,853 hours
At turn-on
At turn-off
(See Note 1)
0.5% max.
100 mV max.
Undershoot
Ripple and noise
5 Hz to 20 MHz
30 mV
Vin = 5 V, Vout = 2.5 V
Coplanarity
150 μm
Transient response
(See Notes 1, 2)
130 mV max. deviation
50 μs recovery within
regulation band
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient,
0 °C to +70 °C
INPUT SPECIFICATIONS
(See Note 5)
temperature
Non-operating
-40 °C to +125 °C
Input voltage range
4.5-13.8 Vdc
PROTECTION
Input current
Minimum load
50 mA
5 mA
Remote OFF
Short-circuit
Hiccup, non-latching
Hiccup, non-latching
Input current (max.)
Start-up time
(See Note 3)
18 A @ Io max.
3 ms
Overvoltage protection
Remote ON/OFF
RECOMMENDED SYSTEM CAPACITANCE
Input capacitance
(See Note 6)
(See Note 7)
0 μF
0 μF
Output capacitance
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2
TÜV Product Service (EN60950)
CB report and certificate to IEC60950
File Name: sil/smt20c2.pdf Rev: 27 Aug 2008