SMPJ5.0 THRU SMPJ100CA
Stand-off Voltage - 5.0 to 100 Volts Peak Pulse Power: 5000 Watts
TRANSIENT VTAGE SUPPRESSOR
SMP
Features
ƹ
Excellent clamping capability
◆ Low dynamic impedance
◆ Solder dip 260 °C max. 10 s, per JESD 22-B106
Mechanical Data
Case : JEDEC SMP Molded plastic body
Terminals : Tin plated leads, solderable per J-STD- 002 and
JESD22-B102
Mounting Position: Any
0D[LPXPꢀ5DWLQJVꢀꢁꢀ(OHFWULFDOꢀ&KDUDFWHULVWLFV
Ratings at TA = 25°C unless otherwise specified
Dimensions in inches and (millimeters)
PARAMETER
SYMBOL
PPPM
UNIT
W
Max
5000
Peak power dissipation, with a 10/1000us waveform(1)(2 )
Power dissipation, on infinite heat sink at TL=75℃(2)
PD
W
8.0
Peak forward surge current, 8.3 ms single half sine-wave unidirectional only
(3)
IFSM
A
400
Operating junction and storage temperature range
TJ,TST G
VFM
-55 to +150
3.5
℃
Maximum instantaneous forward voltage at 100A for unidirectional only(4)
V
RθJ-A
RθJ-L
75
15
℃/W
℃/W
Junction to ambient
Junction to lead
Notes:
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA= 25℃per Fig.2.
(2) Mounted on 0.31 x 0.31" (8.0 x 8.0 mm) copper pads to each terminal
(3) Measured on 8.3ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum.
(4) VF=3.5V Max for devices of VBR≤220v,and VF=5.0v Max for devices of VBR>220v.
(5) Mounted on minimum recommended pad layout.
DN:T19731A0
https://www.microdiode.com
Rev:2019A0
Page :1