Switched mode power supply for DIN rail mounting type SMP21 DC24V/10A
Description
Switched mode power supply for rail mounting, with independent
change-over of input voltages (AC 115/230 V), integral passive power
factor compensation (PFC), high power reserve and optional parallel
mode.
Features and Benefits
lꢀ ꢀThe devices switches over automatically when connected to
AC 115 V AC and 230 V
lꢀ ꢀWide range inputs from AC 90 to 132 V at rated input voltage 115
V, and AC 180 to 264 V at rated input voltage 230 V
lꢀ Efficiency up to 89%
lꢀ Integral passive power factor compensation
lꢀ Parallel mode for performance improvement (selectable by switch)
SMP21-DC24V-10A
Version L20
Technical data (TU = 25°C, UB = AC 115 / 230 V, I0 = 10A)
Typical applications
Operating data
Input voltage ranges UE AC 90…132 V / AC 180…264 V
Process control, industrial switch- and controlgear, machine
construction, telecommunication systems
Operating voltage range AC 115 / 230 V
UB
Effective output
Output voltage UO
Output current rating IO
Efficiency
240 W
Order numbering code
24 V SELV
Type No.
10 A
3
SMP21 Single phase switch-mode power supply for rail mounting
87% min. / 89% typically
Connector design
L pcb mounting (preferred type)
S plug-in type
General data
Switching frequency
40 kHz
Insulation voltage
between
input and output
input and
Terminal design
20 screw terminals
Output voltage
AC 3000 V, DC 4242 V
AC 1500 V, DC 2121 V
protective conductor
output and
protective conductor
DC24V DC 24 V
Output current
AC 500 V, DC 710 V
10 A
Insulation resistance
100 MΩ (DC 500 V) between
input and output
SMP21-L 20-DC24V-10A
ordering example
Ambient temperature
-40°C…+71°C
2.5% / °C
Derating factor (see
curve)
Approvals and standards
Storage temperature
Relative humidity
-40°C…+85°C
20…90% RH
Approval Standards
authority
MTBF to Bellcore, ed. 6 481,000 hours at 40°C, GB
UL
UL508, CSA C22.2 No. 107.1 (listed)
Max. altitude in
operation to IEC
60068-2-13
5000 m above sea level
UL 60950-1, CSAC22.2 No. 60950-1 (recognized)
EN 60950-1 / EN61558-1 / EN61558-2-16
TÜV
Rheinland
Cooling
by convection
Mounting direction
Pollution degree
Input circuit
wall-mounted (see dimensions)
2
EMC
EN 61000-6-3, EN 61000-6-2, EN 61204-3
Input rated voltage
Input voltage ranges
Input current
AC 115 V / AC 230 V
AC 90…132 V / DC 180…264 V
1.55 A typically at UB = AC 230 V
4.0 A typically at UB = AC 115 V
Max. input current
Supply frequency
2.2 A at UB = AC 180 V
5.4 A at UB = AC 88 V
47...63 Hz
1646
www.e-t-a.de
1