SMP3V3 thru SMP36A
Vishay General Semiconductor
www.vishay.com
®
Surface Mount TRANSZORB
Transient Voltage Suppressors
FEATURES
eSMP® Series
• Very low profile - typical height of 1.0 mm
• Ideal for automated placement
• Available in uni-directional
• 400 W peak pulse power capability with a
10/1000 μs waveform
• Excellent clamping capability
• Very fast response time
SMP (DO-220AA)
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
Anode
Cathode
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
click logo to get started
DESIGN SUPPORT TOOLS
TYPICAL APPLICATIONS
Models
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
Available
PRIMARY CHARACTERISTICS
VBR uni-directional
4.10 V to 44.2 V
MECHANICAL DATA
VWM
3.3 V to 36 V
400 W
Case: SMP (DO-220AA)
Molding compound meets UL 94 V-0 flammability rating
PPPM
Base P/N-M3
industrial grade
- halogen-free, RoHS-compliant, and
IFSM
40 A
TJ max.
Polarity
Package
150 °C
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 2 whisker test
Uni-directional
SMP (DO-220AA)
Polarity: color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
IPPM
VALUE
UNIT
W
Peak pulse power dissipation with a 10/1000 μs waveform (fig. 1) (1)(2)
Peak pulse current with a 10/1000 μs waveform (1)
Peak forward surge current 10 ms single half sine-wave (2)
Maximum instantaneous forward voltage at 25 A (3)
Operating junction and storage temperature range
400
See table next page
A
IFSM
40
2.5
A
VF
V
TJ, TSTG
-55 to +150
°C
Notes
(1)
(2)
(3)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal
Pulse test: 300 μs pulse width, 1 % duty cycle
Revision: 10-Aug-2018
Document Number: 88481
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000