APPLICABLE STANDARD
MIL-STD-348B
OPERATING
STORAGE
-40C TO +85C (95%RH MAX)
-40C TO +85C(95%RH MAX)
50Ω (DC TO 30 GHz)
―――
TEMPERATURE RANGE
TEMPERATURE RANGE
CHARACTERISTIC
IMPEDANCE
RATING POWER
PECULIARITY
0.25W (at 65℃)
APPLICABLE
CABLE
―――
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
QT AT
CONSTRUCTION
GENERAL EXAMINATION
VISUALLY AND BY MEASURING INSTRUMENT.
CONFIRMED VISUALLY.
ACCORDING TO DRAWING.
X
X
X
X
MARKING
ELECTRIC CHARACTERISTICS
V.S.W.R.
FREQUENCY DC TO 30 GHz.
VSWR <1.15
<1.2
: DC TO 15 GHz
:15 TO
:25 TO
25 GHz
30 GHz
X
X
X
X
<1.25
RESISTANCE VALUE
MEASURE TH RESISTANCE VALURE AT DC1V.
49 TO 51 Ω.
MECHANICAL CHARACTERISTICS
INSERTION FORCE
N MAX.
N MIN
CONTACT INSERTION AND [SMP SIDE]
-
X
-
-
-
+0
EXTRACTION FORCES
φ0.35
BY STEEL GAUGE.
BY STEEL GAUGE.
EXTRACTION FORCE
INSERTION FORCE
0.2
-0.005
N MAX.
-
[HK SIDE]
EXTRACTION FORCE
N MIN
-
-
INSERTION FORCE
65 N MAX.
16 N MIN
INSERTION AND
MEASURED BY APPLICABLE CONNECTOR.
[APPLICABLE CONNECTOR : SMPP(FD)-HKP]
100 TIMES INSERTIONS AND EXTRACTIONS.
[APPLICABLE CONNECTOR : SMPP(FD)-HKP]
-
X
WITHDRAWAL FORCES
MECHANICAL OPERATION
EXTRACTION FORCE
1)ELECTRICAL CHARACTERISTIC
SHALL BE MET.
2) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
X
-
-
VIBRATION
SHOCK
FREQUENCY 10 TO 500 Hz
SINGLE AMPLITUDE 0.75 mm, 98 m/s2
1)ELECTRICAL CHARACTERISTIC
SHALL BE MET.
2) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
X
AT 10 CYCLES FOR 3 DIRECTIONS.
490 m/s2 DIRECTIONS OF PULSE 11 ms
X
AT
APPLYING A PULL FORCE THE CABLE AXIALLY
AT N MAX.
3
TIMES FOR
3
DIRECTIONS.
-
-
CABLE CLAMP
1) NO WITHDRAWAL AND BREAKAGE OF
CABLE.
ROBUSTNESS
-
(AGAINST CABLE PULL)
2) NO BREAKAGE OF CLAMP.
ENVIRONMENTAL CHARACTERISTICS
DAMP HEAT
1)ELECTRICAL CHARACTERISTIC
SHALL BE MET.
EXPOSED AT +40 C, IN HUMIDITY 90~95
FOR 96 h
X
X
X
-
-
-
2) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
RAPID CHANGE OF
TEMPERATURE
1)ELECTRICAL CHARACTERISTIC
SHALL BE MET.
2) NO DAMAGE, CRACK AND LOOSENESS
OF PARTS.
TEMPERATURE -55 → --- → +85 → --- C
TIME
30 → 3
→
30 → 3 min.
UNDER
5
CYCLES.
CORROSION SALT MIST
COUNT
EXPOSED IN 5 % SALT WATER SPRAY FOR 48 h
ELECTRICAL CHARACTERISTIC
SHALL BE MET.
DESCRIPTION OF REVISIONS
DESIGNED
CHECKED
DATE
△
0
REMARK
APPROVED
CHECKED
DESIGNED
KH.IKEDA
TS.NOBE
17.09.08
17.09.08
17.09.08
RoHS COMPLIANT
AH.MARUYAMA
DRAWN
AH.MARUYAMA
17.09.08
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
DRAWING NO.
PART NO.
CODE NO.
ELC-375383-00-00
SMP-TMJ
SPECIFICATION SHEET
HIROSE ELECTRIC CO., LTD.
0
△
1/1
CL353-0024-0-00
FORM HD0011-2-1