MIL-STD-348B
Applicable standard
Operating
Storage
-55 °C to +125 °C ( 95 %RH Max.)
-20 °C to +70 °C ( 90 %RH Max.)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
3
-- W
----
50 Ω ( 0 to 30 GHz)
Rating Power
----
Peculiarity
SPECIFICATIONS
ITEM
CONSTRUCTION
General examination
Marking
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA (DC or 1000 Hz)
Center contact
Outer contact
1000 MΩ Min.
6 mΩ Max.
6 mΩ Max.
X
X
X
X
X
X
X
X
Insulation resistance
Withstanding voltage
V.S.W.R.
500 V DC.
500 V AC for 1 min. current leakage 2 mA Max.
Frequency
No flashover or breakdown.
0 to 30 GHz.
V.S.W.R.
1.5 Max.
X
-
-
Insertion loss
Frequency
- to - GHz.
--- dB Max.
-
MECHANICAL CHARACTERISTICS
Contact insertion and
φ
--- by steel gauge.
Insertion force
--- N Max.
-
-
X
-
-
X
extraction forces
Insertion and
Extraction force
Insertion force
Extraction force
1)Contact resistance:
Center contact
--- N Min.
65 N Max.
16 N Min.
Measured by applicable connector.
[SMPJ-HKJ]
100 times insertion and extractions.
extraction forces
Mechanical operation
X
X
12 mΩ Max.
12 mΩ Max.
X
-
Outer contact
2)No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 500 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
X
X
-
-
98 m/s2 at 10 cycles for 3 directions.
490 m/s2 directions of pulse 11 ms
2)No damage, crack and looseness of parts.
at 3 times for 3 directions.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of --- mm/min. and record the strength at which
the cable or connector breaks.
--- N Min.
-
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at +25 to +65 °C, 90 to 98 %
total 10 cycles.(240h)
1)Insulation resistance:
(at high humidity)
2) Insulation resistance:
(at dry)
100 MΩ Min.
1000 MΩ Min.
X
-
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature -55 →
-
3
→ +125 →
30 →
-
3
°C
min.
Time
30 →
→
X
X
-
-
Under 5 cycles.
Exposed in 5 % salt water spray for 48 h.
Corrosion salt mist
V.S.W.R.
1.5 Max.[0 to 30 GHz]
Count
1
Description of revisions
DIS-D-00003210
Designed
TK.SAWAGUCHI
Checked
KY.SHIMIZU
Date
18.06.07
3
△
TO.KATAYAMA
17.09.05
Remark
Approved
Checked
Designed
Drawn
RoHS COMPLIANT
Note
KY.SHIMIZU
TK.SAWAGUCHI
TK.SAWAGUCHI
17.09.05
17.09.05
17.09.05
The characteristic after mounting on the board.
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-373487-00-00
SPECIFICATION SHEET
SMP-PR(FD)-SMT-1
CL338-1102-0-00
3
△
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
FORM HD0011-2-1