Applicable standard
Operating
Storage
-55 °C to +125 °C ( 95 %RH Max.)
-55 °C to +125 °C ( 95 %RH Max.)
50 Ω( 0 to 30 GHz)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
-- W
----
Rating Power
0.085 inch coaxial cable
Peculiarity
SPECIFICATIONS
ITEM
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
CONSTRUCTION
General examination
Marking
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
100 mA Max.(DC or 1000 Hz)
Center contact 6 mΩ Max.
Outer contact 6 mΩ Max.
1000 MΩ Min.
X
X
X
X
X
X
X
X
Insulation resistance
Withstanding voltage
Voltage standing
wave ratio
500 V DC.
500 V AC for 1 min. current leakage 2 mA Max.
Frequency 0 to 30 GHz.
No flashover or breakdown.
VSWR 1.3 Max. (0 to 15 GHz)
X
-
-
-
VSWR when connecting with SMPP(FD)-HKP VSWR 1.5 Max. (15 to 30 GHz)
Insertion loss
Frequency to
Frequency to
GHz.
GHz.
---- dB Max.
---- dB Max.
MECHANICAL CHARACTERISTICS
0
Contact insertion and
extraction forces
Insertion and
φ
0.35 -0.005 by steel gauge.
Insertion force
---- N Max.
-
-
-
-
-
Extraction force 0.2 N Min.
Insertion force 65 N Max.
X
X
X
Measured by applicable connector.
Applicable connector: SMPP(FD)-HKP
100 times insertion and extractions.
Applicable connector: SMPP(FD)-HKP
extraction forces
Mechanical operation
Extraction force 16 N Min.
1)Contact resistance:
Center contact 12 mΩ Max.
Outer contact 12 mΩ Max.
X
-
2)No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 500 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
-
-
X
X
98 m/s2 at 12 cycles for 3 directions.
490 m/s2 directions of pulse 11 ms
2)No damage, crack and looseness of parts.
at 3 times for 3 directions.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of 30 mm/min. and record the strength at which
the cable or connector breaks.
40 N Min.
X
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at +25 to +65 °C, 90 to 98 %
total 10 cycles.( 240 h)
1)Insulation resistance: 100 MΩ Min.
(at high humidity)
2) Insulation resistance: 1000 MΩ Min.
(at dry)
X
-
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature
Time
-55 → - → +125 →
- °C
X
X
-
-
30 → 3 →
30 →
3 min.
Under 5 cycles.
Exposed in 5 % salt water spray for 48 h.
Corrosion salt mist
VSWR 1.3 Max. ( 0 to 15 GHz)
VSWR 1.5 Max. (15 to 30 GHz)
Count
Description of revisions
Designed
Checked
Date
0
△
TO.KATAYAMA
KY.SHIMIZU
18.06.05
18.06.05
18.06.05
18.06.05
Remark
Approved
Checked
Designed
Drawn
TM.YOSHIDA
TM.YOSHIDA
Unless otherwise specified, refer to IEC 60512.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
Part No.
ELC-373428-00-00
SMP-LJ-SF085
SPECIFICATION SHEET
0
1/1
HIROSE ELECTRIC CO., LTD.
Code No.
CL338-1101-0-00
△
FORM HD0011-2-1