Applicable standard
Operating
Storage
-55 °C to +125 °C ( 95 %RH Max.)
-55 °C to +125 °C ( 95 %RH Max.)
temperature range
temperature range
Characteristic
impedance
Applicable
cable
-- W
----
50 Ω( 0 to 18 GHz)
Rating Power
----
Peculiarity
SPECIFICATIONS
ITEM
CONSTRUCTION
General examination
Marking
TEST METHOD
REQUIREMENTS
According to drawing.
QT AT
Visually and by measuring instrument.
Confirmed visually.
X
-
X
-
ELECTRICAL CHARACTERISTICS
Contact resistance
10 mA Max.(DC or 1000 Hz)
Center contact
Outer contact
1000 MΩ Min.
12 mΩ Max.
12 mΩ Max.
X
X
X
X
X
-
X
X
X
X
X
-
Insulation resistance
Withstanding voltage
Return loss
500 V DC.
500 V AC for 1 min. current leakage 2 mA Max.
Frequency 0 to 18 GHz.
Frequency - to - GHz.
No flashover or breakdown.
Return loss 20dB Min.
--- dB Max.
Insertion loss
MECHANICAL CHARACTERISTICS
0
Contact insertion and
extraction forces
Insertion and
φ 0.35 -0.005 by steel gauge.
Measured by applicable connector.
500 times insertion and extractions.
Insertion force
Extraction force
Insertion force
--- N Max.
-
X
-
X
0.2 N Min.
--- N Max.
--- N Min.
-
-
-
-
extraction forces
Mechanical operation
Extraction force
1)Contact resistance:
Center contact
24 mΩ Max.
24 mΩ Max.
X
-
Outer contact
2)No damage, crack and looseness of parts.
Vibration
Shock
Frequency 10 to 500 Hz single amplitude 0.75 mm, 1)No electrical discontinuity of 1 μs.
X
X
-
-
98 m/s2 at 10 cycles for 3 directions.
490 m/s2 directions of pulse 11 ms
2)No damage, crack and looseness of parts.
at 3 times for 3 directions.
Cable clamp strength
(Against cable pull)
Using a pulling tester, pull the cable axially at a rate
of --- mm/min. and record the strength at which
the cable or connector breaks.
--- N Min.
-
-
ENVIRONMENTAL CHARACTERISTICS
Damp heat
Exposed at -10 to +65 °C, 90 to 98 %
total 10 cycles.( 240 h)
1)Insulation resistance:
(at high humidity)
2) Insulation resistance:
(at dry)
100 MΩ Min.
1000 MΩ Min.
X
-
3)No damage, crack and looseness of parts.
No damage, crack and looseness of parts.
Rapid change of
temperature
Temperature
Time
-65 → - → +125 → - °C
30 → 3 → 30 → 3 min.
X
X
-
-
Under 5 cycles.
Exposed in 5 % salt water spray for 48 h.
Corrosion salt mist
No heavy corrision.
(The quality is judged by Return loss performance)
Count
Description of revisions
Designed
Checked
Date
0
△
KY.SHIMIZU
TO.KATAYAMA
RO.YOKOYAMA
RO.YOKOYAMA
16.11.07
16.11.05
16.11.05
16.11.05
Remark
Approved
Checked
Designed
Drawn
RoHS COMPLIANT
Unless otherwise specified, refer to MIL-STD-202.
Note QT:Qualification Test AT:Assurance Test X:Applicable Test
Drawing No.
ELC-364312-00-00
SMP-A-JJ-645-18G
SPECIFICATION SHEET
Part No.
0
△
1/1
HIROSE ELECTRIC CO., LTD.
FORM HD0011-2-1
Code No.
CL338-1005-0-00