SMLJ10AHE3A THRU SMLJ48CAHE3A
E480232
Features
•
•
•
•
•
•
•
•
•
•
•
•
AEC-Q101 Qualified
For Surface Mount Application in Order to Optimize Board Space
Built-in Strain Relief
Glass Passivated Junction
Excellent Clamping Capability
3000 Watt TVS
10 to 48 Volts
Repetition Rate(duty cycle):0.5%
Fast Response Time: Typical Less Than 1ps From 0V to BV Min
Typical ID Less Than 1μA above 10V
High Temperature Soldering: 260°C/10 Seconds at Terminals
Halogen Free. "Green" Device (Note 1)
Moisture Sensitivity Level 1
For Bidirectional Devices Add “C” To The Suffix of
The Part Number: i.e.SMLJ10CAHE3A for 5% Tolerance
SMC (DO-214AB)
(LEAD FRAME)
•
•
Epoxy Meets UL 94 V-0 Flammability Rating
Lead Free Finish/RoHS Compliant (Note2) ("P" Suffix Designates
RoHS Compliant. See Ordering Information)
G
Mechanical Data
• Polarity: Color Band Denotes Positive End( Cathode) Except
Bi-directional Types
H
• Weight: 0.007 ounce, 0.21 gram
Cathode Mark
D
• Manufacturing Code Added for Better Tracking
• Standard Packaging: 16mm Tape Per ( EIA 481).
• Terminals: Solderable Per MIL-STD-750, Method 2026
Maximum Ratings
A
C
E
B
F
•
•
•
Operating Junction Temperature Range: -55°C to +150°C
Storage Temperature Range: -55°C to +150°C
Thermal Resistance: 17.5°C/W Junction to Lead
DIMENSIONS
INCHES
MM
DIM
NOTE
MIN MAX MIN MAX
0.079 0.103 2.00 2.62
0.108 0.128 2.75 3.25
0.002 0.008 0.051 0.203
0.006 0.012 0.152 0.305
0.030 0.060 0.76 1.52
0.305 0.320 7.75 8.13
0.260 0.280 6.60 7.11
0.220 0.245 5.59 6.22
•
Thermal Resistance: 75°C/W Junction to Ambient
A
B
C
D
E
F
Electrical Characteristics @ 25°C Unless Otherwise Specified
Peak Pulse Power
Surge Current on
10/1000μs Waveform
IPPM
See the Table
3000W(Min)
Note 3
G
H
Peak Pulse Power
Dissipation on
PPPM
Note 3,4
10/1000μs Waveform
Suggested Solder Pad Layout
Power Dissipationon
infinite heat sink
PD
TL = 50°C.
6.5W
4.40mm
8.3 ms Single Half
Sine-Wave
Unidirectional Only
Peak Forward
Surge Current
IFSM
300A
3.30mm
Note: 1. Halogen free "Green” products are defined as those which contain <900ppm bromine,
<900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.
2.50mm
2. High Temperature Solder Exemption Applied, see EU Directive Annex 7a.
3. Non-repetitive current pulse, per Fig.3 and derated above TA=25 °C per Fig.4.
4. Mounted on 8.0mm2 copper pads to each terminal.
Rev.3-3-12012020
1/4
MCCSEMI.COM