TVS Diodes
Surface Mount – 200W > SMF Series
Pb e3
RoHS
SMF Series
Description
The SMF series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Uni-directional
SMF package is 50% smaller in footprint when compare
to SMA package and deliverying one of the low height
profiles (1.1mm) in the industry.
Bi-directional
Features
• 200W peak pulsepower
capability at 10/1000µs
waveform, repetition rate
(duty cycle): 0.01%
•Compatible with
industrial standard
package SOD-123FL
• Low profile: maximum
height of 1.1mm.
• Low inductance, excellent
clamping capability
• EFT protection of data
lines in accordance with
IEC 61000-4-4
• Fast response time:
typically less than 1.0ns
from 0 Volts to VBR min
• Glass passivated junction
• Built-in strain relief
• Plastic package is
flammability rated V-0 per
UL 94
Agency Approvals
Agency
Agnecy File Number
E230531
Maximum Ratings andThermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol Value
Unit
8/20μs
1000
Peak Pulse Power Dissipation
atTA=25ºC (Note 1)
PPPM
W
• Meet MSL level1, per
J-STD-020, LF maximun
peak of 260°C
10/1000μs (Note 2)
200
• For surface mounted
applications to optimize
board space
Power Dissipation On Infinite Heat Sink at
TL=50ºC
PD
1
W
• Matte tin lead–free plated
• Halogen-free and RoHS
compliant
• Pb-free E3 means 2nd
level interconnect is
Pb-free and the terminal
finish material is tin(Sn)
(IPC/ JEDEC J-STD-
609A.01)
Thermal Resistance Junction- to- Ambient
RƟJA
220
°C/W
• High temperature
to reflow soldering
guaranteed:
Thermal Resistance Junction- to- Lead
OperatingTemperature Range
StorageTemperature Range
RƟJL
TJ
100
°C/W
°C
-65 to 150
260°C/430sec
TSTG -65 to 175
°C
•Typical failure mode is
short from over-specified
voltage or current
• Whisker test is conducted
based on JEDEC
Notes:
1. Non-repetitive current pulse, per Fig. 4 and derated above TJ (initial) =25ºC per Fig. 3.
2. SMF90A~SMF100A Peak Pulse Power Dissipation is 170W min, 200W typical @ 10/1000us
Functional Diagram
JESD201A per its table 4a • UL Recognized to UL
and 4c
• IEC-61000-4-2 ESD
497B as an Isolated Loop
Circuit Protector.
Bi-directional
30kV(Air), 30kV (Contact)
• ESD protection of data
lines in accordance with
IEC 61000-4-2
Cathode
Anode
Uni-directional
Applications
Additional Infomarion
SMF devices are ideal for the protection of I/O interfaces,
CC bus and other vulnerable circuit used in cellular
V
phones, portable devices, business machines, power
supplies and other consumer applications.
Datasheet
Samples
Resources
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 05/15/20