SMDA03C-4
THRU
M C C
ꢀꢁꢂꢃꢄꢅꢆꢄꢇꢇꢈꢃꢂꢁꢉꢊꢅꢆomponents
21201 Itasca Street Chatsworth
ꢆꢋꢅꢌꢍꢎꢍꢍ
ꢏꢐꢄꢑꢈꢒꢅꢓꢔꢍꢔ ꢅ!ꢕꢍ"#ꢌꢎꢎ
$ꢉ%ꢒꢅ ꢅ ꢅ ꢓꢔꢍꢔ ꢅ!ꢕꢍ"#ꢌꢎꢌ
SMDA24C-4
TVSarrayÔ Series
DESCRIPTION (300 watt)
This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is packaged in
an SO-8 configuration giving protection to 4 Bidirectional data or
interface lines. It is designed for use in applications where protection is
required at the board level from voltage transients caused by
electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical
fast transients (EFT) per IEC 1000-4-4 and effects of secondary
lighting.
These TVS arrays have a peak power rating of 300 watts for an 8/20 msec pulse. This array is suitable for
protection of sensitive circuitry consisting of TTL, CMOS DRAM’s, SRAM’s, HCMOS, HSIC
microprocessors, and I/O transceivers. The SMDAXXC-4 product provides board level protection from
static electricity and other induced voltage surges that can damage sensitive circuitry.
FEATURES
MECHANICAL
·
·
·
Protects up to 4 Bidirectional lines
·
·
·
·
Molded SO-8 Surface Mount
Surge protection Per IEC 1000-4-2, 1000-4-4
SO-8 Packaging
Weight: 0.066 grams (approximate)
Marking: Logo, device number, date code
Pin #1 defined by DOT on top of package
MAXIMUM RATINGS
PACKAGING
·
·
·
·
Operating Temperatures: -550C to +1500C
Storage Temperature: -550C to +1500C
Peak Pulse Power: 300 Watts (8/20 msec, Figure 1)
Pulse Repetition Rate: <.01%
·
·
·
Tape & Reel EIA Standard 481-1-A
13 inch reel 2,500 (OPTIONAL)
Carrier tubes 95 pcs per (STANDARD)
ELECTRICAL CHARACTERISTICS PER LINE @ 250C Unless otherwise specified
STAND
BREAKDOWN
VOLTAGE
VBR
CLAMPING
VOLTAGE
VC
@ 1 Amp
(FIGURE 2)
VOLTS
CLAMPING
VOLTAGE
VC
@ 5 Amp
(FIGURE 2)
VOLTS
LEAKAGE
CURRENT
ID
CAPACITANCE
OFF
VOLTAG
E
TEMPERATURE
COEFFICIENT
OF VBR
(f=1 MHz)
@0V
C
PART
NUMBER
DEVICE
MARKING
@1 mA
@ VWM
VWM
áVBR
mV/°C
VOLTS
µA
pF
VOLTS
MIN
4
MAX
7.0
MAX
9.0
11
MAX
200
40
1
TYP
300
200
185
140
90
MAX
-5
SMDA03C-4
SMDA05C-4
SMDA12C-4
SMDA15C-4
SMDA24C-4
REA
REB
REC
RED
REE
3.3
5.0
6.0
9.8
3
12.0
15.0
24.0
13.3
16.7
26.7
19.0
24.0
43.0
24
10
13
30
30
1
55
1
NOTE: TVS product is normally selected based on its stand off Voltage VWM. Product selected voltage should be
equal to or greater than the continuous peak operating voltage of the circuit to be protected.
Application: The SMDAXXC-4 product is designed for transient voltage suppression protection of ESD sensitive
components at the board level. It is an ideal product to be used for protection of I/O Transceivers.
www.mccsemi.com