SMDA03C-5
8700 E. Thomas Road
Scottsdale, AZ 85251
Tel: (480) 941-6300
Fax: (480) 947-1503
thru
SMDA24C-5
TVSarrayÔ Series
DESCRIPTION (300 watt)
This TRANSIENT VOLTAGE SUPPRESSOR (TVS) array is
packaged in SO-8 configuration giving protection to
a
5
Bidirectional data or interface lines. It is designed for use in
applications where protection is required at the board level from
voltage transients caused by electrostatic discharge (ESD) as
defined in IEC 1000-4-2, electrical fast transients (EFT) per IEC
1000-4-4 and effects of secondary lighting.
These TVS arrays have a peak power rating of 300 watts for an 8/20
msec pulse. This array is suitable for protection of sensitive circuitry consisting of TTL, CMOS DRAM’s,
SRAM’s, HCMOS, HSIC microprocessors, and I/O transceivers. The SMDAXXC-5 product provides board
level protection from static electricity and other induced voltage surges that can damage sensitive circuitry.
FEATURES
MECHANICAL
·
·
·
Protects up to 5 Bidirectional lines
·
·
·
·
Molded SO-8 Surface Mount
Surge protection Per IEC 1000-4-2, 1000-4-4
SO-8 Packaging
Weight: 0.066 grams (approximate)
Marking: Logo, device number, date code
Pin #1 defined by DOT on top of package
MAXIMUM RATINGS
PACKAGING
·
·
·
·
Operating Temperatures: -550C to +1500C
Storage Temperature: -550C to +1500C
Peak Pulse Power: 300 Watts (8/20 msec, Figure 1)
Pulse Repetition Rate: <.01%
·
·
·
Tape & Reel EIA Standard 481-1-A
13 inch reel 2,500, pieces (OPTIONAL)
Carrier tubes 95 pcs per (STANDARD)
ELECTRICAL CHARACTERISTICS PER LINE @ 250C Unless otherwise specified
STAND
OFF
VOLTAGE
VWM
BREAKDOWN
VOLTAGE
VBR
CLAMPING
VOLTAGE
VC
@ 1 Amp
(FIGURE 2)
VOLTS
CLAMPING
VOLTAGE
VC
@ 5 Amp
(FIGURE 2)
VOLTS
LEAKAGE
CURRENT
ID
CAPACITANCE
(f=1 MHz)
@0V
TEMPERATURE
COEFFICIENT
OF VBR
PART
DEVICE
@1 mA
@ VWM
C
áVBR
mV/°C
NUMBER
MARKING
VOLTS
MAX
VOLTS
MIN
µA
pF
MAX
7
MAX
9
MAX
TYP
MAX
-5
SMDA03C-5
SMDA05C-5
SMDA12C-5
SMDA15C-5
SMDA24C-5
SDL5
SDB5
SDD5
SDF5
SDH5
3.3
5.0
4
200
40
1
300
200
75
6.0
9.8
11
24
30
55
3
12.0
15.0
24.0
13.3
16.7
26.7
19.0
24.0
43.0
10
13
30
1
50
1
35
NOTE: TVS product is normally selected based on its stand off Voltage VWM. Product selected voltage
should be equal to or greater than the continuous peak operating voltage of the circuit to be protected.
Application: The SMDAXXC-5 product is designed for transient voltage suppression protection of ESD
sensitive components at the board level. It is an ideal product to be used for protection of I/O Transceivers.
MSC0331A.PDF
ISO 9001 CERTIFIED
REV N 7/06/2000