SMCJ220(C)AL THRU SMCJ350AL
E480232
Features
•
•
•
•
•
•
•
•
•
•
For Surface Mount Application in Order to Optimize Board Space
Built-in Strain Relief
Glass Passivated Junction
Plastic Package Has Underwrites Laboratory Flammability
Temperature Coefficient, Typical Value is 0.1%
Fast Response Time: Typical Less than 1ps from 0V to BV Min
High Temperature Soldering: 260°C/10 Seconds at Terminals
Halogen Free. “Green” Device (Note 1)
1500 Watt TVS
220 to 350 Volts
Moisture Sensitivity Level 1
Epoxy Meets UL 94 V-0 Flammability Rating
•
Lead Free Finish/RoHS Compliant (Note2) ("P" Suffix Designates
Compliant. See Ordering Information)
SMC (DO-214AB)
(LEAD FRAME)
Mechanical Data
• Polarity: Color Band Denotes Positive End( Cathode) Except
Bi-directional Types(Note4)
G
• Weight: 0.007 ounce, 0.21 gram
• IEC-61000-4-2 ESD 15kV(Air), 8kV(Contact)
• Standard Packaging: 16mm Tape Per ( EIA 481)
• Terminals: Solderable Per MIL-STD-750, Method 2026
H
Cathode Mark
D
Maximum Ratings
A
C
•
•
•
Operating Junction Temperature Range: -55°C to +175°C
Storage Temperature Range: -55°C to +175°C
Typical Thermal Resistance: 15°C/W Junction to Lead
E
B
F
•
Typical Thermal Resistance: 75°C/W Junction to Ambient
Electrical Characteristics @ 25°C Unless Otherwise Specified
DIMENSIONS
MM
Peak Pulse Power
INCHES
DIM
NOTE
IPPM
Surge Current on
See the Table Note 3
MIN MAX MIN MAX
0.079 0.103 2.00 2.62
0.108 0.128 2.75 3.25
0.002 0.008 0.051 0.203
0.006 0.012 0.152 0.305
0.030 0.060 0.76 1.52
0.305 0.320 7.75 8.13
0.260 0.280 6.60 7.11
0.220 0.245 5.59 6.22
10/1000μs Waveform
A
B
C
D
E
F
Peak Pulse Power
Dissipation on
10/1000μs Waveform
PPPM
1500W
6.5W
Note 3,4,Fig1
Power Dissipationon
infinite heat sink
G
H
PD
TL = 75°C.
Peak forward surge
current, 8.3 ms single
half sine-wave
Suggested Solder Pad Layout
IFSM
200A
4.40mm
unidirectional only
Maximum
5V (MAX)
4V (TYP)
instantaneous forward
voltage at 100A for
unidirectional only
VF
3.30mm
Note:
2.50mm
1. Halogen free "Green” products are defined as those which contain <900ppm bromine,
<900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.
2. High Temperature Solder Exemption Applied, see EU Directive Annex 7a.
3. Non-repetitive current pulse, per Fig.3 and derated above T =25 °C per Fig.4.
A
2
4. Mounted on 8.0mm copper pads to each terminal.
Rev.3-3-12012020
1/4
MCCSEMI.COM