SMCJ5.0(A)
SMCJ440A
THRU
TVS DIODE
FEATURES
Built-in strain relief
Glass passivated junction
Low inductance
Excellent clamping capability
Repetition Rate (duty cycle):0.01%
Fast response time: typically less than 1.0ps
from 0 Volts to V(BR) for unidirectional types
Typical IR less than 1mA above 10V
High temperature soldering guaranteed: 260°C/10 seconds,
Surface Mount device
MECHANICAL DATA
Case: SMC(DO-214AB)
Case Material: Molded Plastic. UL flammability
Classification Rating: 94V-0
Weight: 0.21 grams (approximate)
MAXIMUM RATINGS AND CHARACTERISTICS(TA = 25°C unless otherwise noted)
Symbol
Value
Unit
W
Peak Power Dissipation at TA=25°C, Tp=1ms (Note 1)
Peak pulse current with a 10/1000μs waveform (Note 1)
Steady State Power Dissipation
PPK
IPPM
PD
Minimum 1500
See next table
6.5
A
W
Typical thermal resistance, junction to ambient (Note5)
RθJA
100.0
°C/W
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed
on Rated Load(JEDEC method) (Note 2, 3) - Unidirectional Only
Typical thermal resistance, junction to ambient (NOTE5)
IFSM
RθJL
200
20
A
°C/W
V
Maximum Instantaneous Forward Voltage at 100.0A for Unidirectional
Only (Note 4)
VF
3.5/5.0
-55 ~+150
Operating junction and storage temperature range
TJ, TSTG
°C
Notes: 1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25°C Per Fig. 2.
2. Mounted on 8.0mm2 (.013mm Thick) Copper Pads to Each Terminal.
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute
Maximum.
4. VF=3.5V on SMCJ5.0 thru SMCJ90 Devices and VF=5.0V on SMCJ100 thru SMCJ170 Devices.
5.Mounted on minimum recommended pad layout.
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types SMCJ5.0 through Types SMCJ170.
2. Electrical Characteristics Apply in Both Directions.
1 / 6
©GUANGDONG HOTTECH INDUSTRIAL CO.,LTD
E-mail:hkt@heketai.com