SMCJ5.0 thru 188CA
Vishay Semiconductors
formerly General Semiconductor
Surface Mount TRANSZORB®
Transient Voltage Suppressors
Stand-off Voltage 5.0 to 188V
Peak Pulse Power 1500W
Cathode Band
DO-214AB
(SMC J-Bend)
0.126 (3.20)
0.114 (2.90)
0.245 (6.22)
0.220 (5.59)
Mounting Pad Layout
0.185 MAX.
(4.69 MAX.)
0.280 (7.11)
0.260 (6.60)
0.121 MIN.
(3.07 MIN.)
0.012 (0.305)
0.006 (0.152)
0.103 (2.62)
0.079 (2.06)
0.060 MIN.
(1.52 MIN.)
0.060 (1.52)
0.030 (0.76)
Dimensions in inches
and (millimeters)
0.008
(0.203)
Max.
0.320 REF
0.320 (8.13)
0.305 (7.75)
Features
Mechanical Data
• Underwriters Laboratory Recognition under UL standard
Case: JEDEC DO-214AB molded plastic over
for safety 497B: Isolated Loop Circuit Protection
passivated junction
• Low profile package with built-in strain relief for
surface mounted applications
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
• Glass passivated junction
Polarity: For unidirectional types the band denotes the
cathode, which is positive with respect to the anode
under normal TVS operation
• Low incremental surge resistance, excellent clamping
capability
• 1500W peak pulse power capability with a 10/1000µs
waveform, repetition rate (duty cycle): 0.01%
Weight: 0.007oz., 0.21g
• Very fast response time
Flammability: Epoxy is rated UL 94V-0
• High temperature soldering guaranteed:
250°C/10 seconds at terminals
• Contact local sales office for gull-wing lead
Packaging Codes – Options (Antistatic):
51 – 1K per Bulk box, 10K/carton
57 – 850 per 7” plastic Reel (16mm tape), 8.5K/carton
9A – 3.5K per 13” plastic Reel (16mm tape), 35K/carton
(SMCG prefix) form (DO-215AB)
Devices for Bidirectional Applications
For bi-directional devices, use suffix C or CA (e.g. SMCJ10C, SMCJ10CA). Electrical characteristics apply in both directions.
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol
PPPM
IPPM
Value
Minimum 1500
See Next Table
200
Unit
Peak pulse power dissipation with
W
a 10/1000µs waveform(1)(2)
Peak pulse current with a 10/1000µs waveform(1)
A
Peak forward surge current 8.3ms single half sine-wave(2)
uni-directional only
IFSM
A
Typical thermal resistance, junction to ambient(3)
RθJA
RθJL
75
15
°C/W
°C/W
°C
Typical thermal resistance, junction to lead
Operating junction and storage temperature range
TJ, TSTG
–55 to +150
Notes: (1) Non-repetitive current pulse, per Fig.3 and derated above TA = 25°C per Fig. 2
(2) Mounted on 0.31 x 0.31” (8.0 x 8.0mm) copper pads to each terminal
(3) Mounted on minimum recommended pad layout
Document Number 88394
1-May-02
www.vishay.com
1