SMCJ SERIES
SURFACE MOUNT
REVERSE VOLTAGE - 5.0 to 170 Volts
POWER DISSIPATION - 1500 Watts
UNIDIRECTIONAL AND BIDIRECTIONAL
TRANSIENT VOLTAGE SUPPRESSORS
.
FEATURES
● Rating to 200V VBR
SMC
● For surface mounted applications
● Reliable low cost construction utilizing molded plastic
technique
.128(3.25)
.108(2.75)
.245(6.22)
.220(5.59)
● Plastic material has UL recognition 94V-0
● Typical IR less than 1µA above 10V
● Fast response time:typically less than 1.0ns for
Uni-direction,less than 5.0ns fo Bi-direction,from 0 Volts
to BV min
.280(7.11)
.260(6.60)
.012(.305)
.006(.152)
MECHANICAL DATA
● Case : Molded Plastic
.103(2.62)
.079(2.00)
● Polarity:by cathode band denotes uni-directional device
none cathode band denotes bi-directional device
● Weight : 0.007 ounces, 0.21 grams
.008(.203)
.002(.051)
.060(1.52)
.030(0.76)
.320(8.13)
.305(7.75)
Dimensions in inches and(millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
VALUE
SYMBOL
UNIT
CHARACTERISTICS
Peak Power Dissipation at TA=25℃
PPK
Minimum 1500
WATTS
TP=1ms (NOTE1,2)
Peak Forward Surge Current
IFSM
200
AMPS
8.3ms Single Half Sine-Wave
Super Imposed on Rated Load (JEDEC Method)
5.0
PM(AV)
VF
WATTS
VOLTS
Steady State Power Dissipation at TL=75℃
Maximum Instantaneous Forward Voltage
SEE NOTE4
at 100A for Unidirectional Devices Only (NOTE3)
-55 to + 150
-55 to + 175
Operating Temperature Range
Storage Temperature Range
TJ
℃
℃
TSTG
NOTES:1. Non-repetitive current pulse ,per Fig. 3 and derated above TA=25℃ per Fig. 1.
2. Thermal Resistance junction to Lead.
3. 8.3ms single half-wave duty cycle=4 pulses per minutes maximum (uni-directional units only).
4. VF=3.5V on SMCJ5.0 thru SMCJ90A devices and VF=5.0V on SMCJ100 thru SMCJ170A devices.
~ 288 ~