PVA Pick-to-Light Array
Datasheet
Light Screen for Error-Proofing of Bin-Picking Operations
•
•
•
•
•
•
Compact package, available in 4 lengths to fit many sizes and configurations of existing parts bins
Range up to 2 m (6.5 ft)
Two-component system (asynchronous emitter and receiver) needs no sync wire or controller box.
Emitters and receivers sold separately or in pairs for easy ordering.
Two LEDs on each emitter and receiver indicate proper setup and system errors.
Clearly visible green job indicator lights mounted on either side of emitter and receiver housings; the
light can be remotely controlled to initiate user action with a solid ON or blinking condition
•
•
Two frequency settings to prevent crosstalk in close-proximity, multiple-array installations
Easy DIP-switch selection of light/dark operate, solid/flashing job light, A/B frequency, and gate
polarity for activating the job light indicator.
•
Choose 2 m (6.5 ft) unterminated cable or 2 m (6.5 ft) cable with 4-pin Euro-style quick-disconnect
connector.
•
•
•
•
•
PNP or NPN receiver output, depending on model
12 to 30V dc operation
Minimum resolution 35 mm (1.4 in)
Wide beam pattern for easy alignment
Heavy-duty protective brackets available
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or
death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.
Models
NOTE: Additional models on the next page.
NOTE: Cable diameter is 3.3 mm (0.13 in) on all models.
1
2
Model
Array Length / #
Beams
Job Light Input
Receiver Output
Description
PVA100N6
PVA100N6E
PVA100N6R
PVA100P6
PVA100P6E
PVA100P6R
PVA225N6
PVA225N6E
PVA225N6R
PVA225P6
PVA225P6E
PVA225P6R
PVA300N6
PVA300N6E
PVA300N6R
Emitter/Receiver Pair
Emitter
0V dc
NPN (Sinking)
Receiver
100 mm (4 in) Long, 5
Beams
Emitter/Receiver Pair
Emitter
+5 to 30V dc
PNP (Sourcing)
NPN (Sinking)
PNP (Sourcing)
NPN (Sinking)
Receiver
Emitter/Receiver Pair
Emitter
0V dc
Receiver
225 mm (9 in) Long, 5
Beams
Emitter/Receiver Pair
Emitter
+5 to 30V dc
Receiver
Emitter/Receiver Pair
Emitter
300 mm (12 in) Long, 13
Beams
0V dc
Receiver
1
Only cabled models (2 m (6.5 ft) unterminated integral cable) are listed. For 2 m (6.5 ft) pigtail with Euro-style Quick-disconnect fitting, add "Q" to the
model number (for example, PVA100N6Q).
See Configuration on page 4
2
Original Document
52088 Rev. F
12 September 2016
52088