LED..SM Series Spot Lights
LED Spot Lights for Use with PresencePLUS® P4 Sensors
For the latest technical information about this product, including specifications, dimensions, and wiring, see www.BannerEngineer-
ing.com.
• Low-cost, compact washdown spot lights for PresencePLUS® sensors.
See Banner’s Web site (www.bannerengineering.com) for a complete light-
ing tutorial.
• Continuous or strobed operation is selectable via sensor software.
• Solid-state LED; adjustable spot size (see Specifications on page 1).
• Direct connection to PresencePLUS P4
• Standard 1/4 - 20 thread mounting hole, compatible with camera mounting
bracket knuckle.
Models
Model
Color
Ambient Light Filter Kit
LEDRSM
LEDWSM
LEDBSM
LEDGSM
Visible Red, 620-630 nm
Cool White, 5500-8300 K
Blue, 465-485 nm
Green, 520-535 nm
FLTR
FLTB or FLTG
FLTB
FLTG
Specifications
Light Source
Useful Life
LED; see Models table for wavelengths
Illumination
High-intensity spot light
Supply Voltage and Current
50,000 hours (LED ON time). When operated within
specification, output will decrease less than 30% after
50,000 hours.
Operating Conditions
-40° to +50° C ( -40° to +122° F)
90% @ 50° C (non-condensing) max. rel. humidity
Cleaning Instructions
Voltage supplied by PresencePLUS sensor: 10-30V dc
@360mA max.
Connections
Regularly remove any dust, dirt, or fingerprints from the
light source.
2 m (6.5') attached pigtail with 3-wire, 8 mm Pico-style
connector
Construction
1. Blow off dust using anti-static compressed air.
2. If necessary, use a lens cloth and lens cleaner or
window cleaner to wipe off remaining debris. Do
not use any other chemicals for cleaning.
Black anodized aluminum, glass lens
Environmental Rating
IEC IP67
Spot Size Relative to Distance
Distance
Spot Size
152 mm (6")
305 mm (12")
76.2 mm (3") min.
178 mm (7") max.
127 mm (5") min.
305 mm (12") max.
P/N 122986 rev. C
2/25/2011
0
122986
8