SMBJ SERIES
600 Watts Surface Mount
Transient Voltage Suppressor
SMB/DO-214AA
.083(2.10)
.077(1.95)
.147(3.73)
.137(3.48)
Features
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
For surface mounted application
Low profile package
.187(4.75)
.167(4.25)
.012(.31)
.006(.15)
Built-in strain relief
Glass passivated junction
Excellent clamping capability
Fast response time: Typically less than 1.0ps
from 0 volt to BV min.
.103(2.61)
.078(1.99)
.012(.31)
.006(.15)
ꢀ
ꢀ
Typical IR less than 1μA above 10V
High temperature soldering guaranteed:
.056(1.41)
.035(0.90)
.008(.20)
.004(.10)
o
260 C / 10 seconds at terminals
.209(5.30)
.201(5.10)
ꢀ
ꢀ
Plastic material used carries Underwriters
Laboratory Flammability Classification 94V-0
600 watts peak pulse power capability with a 10
x 1000 us waveform by 0.01% duty cycle
Dimensions in inches and (millimeters)
Mechanical Data
ꢀ
ꢀ
ꢀ
Case: Molded plastic
Terminals: Pure tin plated lead free,
Polarity: Indicated by cathode band except
bipolar
ꢀ
ꢀ
Standard packaging: 12mm tape (EIA STD
RS-481)
Weight: 0.093gram
Maximum Ratings and Electrical Characteristics
o
Rating at 25 C ambient temperature unless otherwise specified.
Type Number
Symbol
Value
Minimum 600
3
Units
Watts
Watts
o
Peak Power Dissipation at TA=25 C, Tp=1ms (Note 1)
P
PK
Steady State Power Dissipation
Pd
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
I
100
Amps
Volts
FSM
(JEDEC method) (Note 2, 3) - Unidirectional Only
Maximum Instantaneous Forward Voltage at 50.0A for
Unidirectional Only (Note 4)
V
3.5 / 5.0
F
R
10
55
o
θJC
Typical Thermal Resistance (Note 5)
C/W
R
θJA
o
Operating and Storage Temperature Range
T , T
J
-65 to + 150
C
STG
o
1. Non-repetitive Current Pulse Per Fig. 3 and Derated above TA=25 C Per Fig. 2.
Notes:
2
2. Mounted on 5.0mm (.013 mm Thick) Copper Pads to Each Terminal.
3. 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 pulses Per Minute Maximum.
4. VF=3.5V on SMBJ5.0 thru SMBJ90 Devices and VF=5.0V on SMBJ100 thru SMBJ170 Devices.
5. Measured on P.C.B. with 0.27 x 0.27” (7.0 x 7.0mm) Copper Pad Areas.
Devices for Bipolar Applications
1. For Bidrectional Use C or CA Suffix for Types SMBJ5.0 through Types SMBJ170.
2. Electrical Characteristics Apply in Both Directions.
Version: A06