SMA6J10AHE3 THRU SMA6J100AHE3
E480232
Features
•
•
•
AEC-Q101 Qualified
600 Watt TVS
10 to 100 Volts
Excellent Clamping Capability
For Surface Mount Applications
•
Glass Passivated Junction
•
•
•
Halogen Free. “Green” Device (Note 1)
High Temp Soldering: 260°C / 10 Seconds At Terminals
For Bidirectional Devices Add “C” to The Suffix of
The Part Number: i.e.SMA6J13CAHE3 for 5% Tolerance
•
•
Moisture Sensitivity Level 1
Epoxy Meets UL 94 V-0 Flammability Rating
SMA (DO-214AC)
•
Lead Free Finish/RoHS Compliant (Note2) ("P" Suffix Designates
RoHS Compliant. See Ordering Information)
LEAD FRAME
H
Mechanical Data
•
Polarity: Indicated by Cathode Band Except Bi-directional Types
J
Maximum Ratings
Cathode Mark
•
•
•
Operating Junction Temperature Range: -55°C to +150°C
Storage Temperature Range: -55°C to +150°C
C
A
E
Typical Thermal Resistance: 33°C/W Junction to Lead
D
B
F
G
Peak Pulse Power
IPPM
Surge Current with a
10/1000μs Waveform
See the Table Note 3
DIMENSIONS
INCHES
MM
DIM
NOTE
MIN MAX MIN MAX
0.075 0.096 1.90 2.44
0.050 0.064 1.27 1.63
0.002 0.008
--- 0.020
0.030 0.060 0.76 1.52
0.065 0.091 1.65 2.32
0.189 0.220 4.80 5.59
0.157 0.187 4.00 4.75
0.090 0.115 2.25 2.92
Peak Pulse Power
Dissipation
PPPM
600 W(Min.)
3.0 W
Note 3
A
B
C
D
E
F
G
H
J
0.051 0.203
--- 0.51
Power Dissipatoin
on Infinite Heatsink
PD
TL = 75°C
Peak Forward Surge
Current Unidirectional Only
IFSM
60 A
Note 4
Note:
SUGGESTED SOLDER PAD LAYOUT
1. Halogen free "Green” products are defined as those which contain <900ppm bromine,
<900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.
2. High temperature solder exemption applied, see EU directive annex 7a.
2.27mm
3. Non-repetitive current pulse per Fig.3 and derated above TA= 25 °C per Fig.4
4. Measured on 8.3 ms single half sine-wave or equivalent square wave, duty
cycle = 4 pulses per minute maximum
2.16mm
Pin Configuration:
Cathode
Anode
1.78mm
Uni-directional
Bi-directional
Rev.3-5-03292022
1/4
MCCSEMI.COM