Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 1467-1
Shielded Power Inductors
–
SLR7010
HHaallooggeenn
FFrreeee
• Tight DCR tolerance for inductor-DCR-based current
sensing circuits
• Excellent current handling
• 10 × 7 × 10 (L x W x H) mm surface mount package
• Designed for use in multi-phase VRM/VRD/EVRD regulators
AEC
+
Q200 105°C
Core material Ferrite
Weight 2.7 – 2.8 g
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over copper.
Ambient temperature –40°C to +105°C with (40°C rise) Irms current.
Maximum part temperature +145°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +145°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 400/13″ reel; Plastic tape: 24 mm wide, 0.5 mm thick, 16
mm pocket spacing, 10.2 mm pocket depth. Quantities less than full reel
available: in tape (not machine ready) or with leader and trailer ($25 charge).
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Isat (A)3
at ±11°C
Irms (A)4
21°C rise 41°C rise
Inductance1
(nH)
DCR ±±102
(mOhms)
SRF typ
(MHz)
Part number
at 25°C
at ±25°C
SLR7010-101KED
SLR7010-121KED
SLR7010-151KED
SLR7010-201KED
SLR7010-251KED
100 10%
120 10%
150 10%
200 10%
250 10%
0.17
0.17
0.17
0.17
0.17
222
159
150
85
113
98
75
62
44
100
84
65
46
36
90
80
60
42
32
72
72
72
72
72
92
92
92
92
92
88
SLR7010-331LED
330 15%
0.17
50
32
26
22
72
92
1. Inductance at 100 kHz, 0.1 Vrms, 0 Adc.
2. DCR is measured on a micro-ohmmeter at points indicated in the
diagram below.
Irms Testing
Irms testing was performed on 0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly dependent on many factors including
pcb land pattern, trace size, and proximity to other components.
Therefore temperature rise should be verified in application
conditions.
3. DC current that causes an inductance drop of 20% (typ) from its value
without current. Click for temperature derating information.
4. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
5. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 1467-1 Revised 06/07/22
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2022
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.