CHENMKO ENTERPRISE CO.,LTD
SLM5817PT
SURFACE MOUNT
SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANGE 20 Volts CURRENT 1.0 Ampere
FEATURES
* Hermetically sealed glass SMD package
* For surface mounted applications
* Low profile package
* Built-in strain relief
* Metal silicon junction, majority carrier conduction
* Low power loss, high efficiency
SOD-87
* High current capability, low forward voltage drop
* For use in low voltage high frequency inverters, free
wheeling, and polarity protection applications
* High temperature soldering guaranteed :
260oC/10 seconds at terminals
3.7
3.3
SOLDERABLE
ENDS
MECHANICAL DATA
Case: JEDEC SOD-87 molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
0.3
2.1
2.0
Polarity: Color band denotes cathode end
Weight: 0.0015 ounce 0.048 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 HZ, resistive or inductive load.
For capacitive load, derate current by 20%.
SOD-87
Dimensions in millimeters
MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted )
RATINGS
SYMBOL
VRRM
UNITS
Volts
SLM5817PT
Maximum Recurrent Peak Reverse Voltage
20
14
20
1.0
Maximum RMS Voltage
VRMS
VDC
IO
Volts
Volts
Amps
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current at TL = 100oC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
CJ
25
Amps
Typic Junction Capacitance (Note 2)
Typical Thermal Resistance (Note 1)
Storage and Operating Temperature Range
Voltage Rate of Change (Note 3)
70
150
pF
oC / W
oC
R
JA
TJ, TSTG
di/dt
-65 to +125
1000
V/uSec
ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted )
CHARACTERISTICS
SYMBOL
UNITS
Volts
SLM5817PT
0.450
@ IF=1.0A
IF=3.0A
Maximum Instantaneous Forward Voltage
at TA = 25oC
VF
IR
@
0.750
1
Volts
@ TA = 25oC
@ TJ = 100oC
mAmps
Maximum Average Reverse Current
at Ratied DC Blocking Voltage
10
mAmps
2002-04
NOTES : 1. Thermal Resistance ( Junction to Lead ) : PC Board Mounted on 0.06 X 0.06" ( 0.15X 0.15mm ) copper pad area.
2. Measured at 1.0 MHZ and applied reverse voltage of 0 volt.
3. dv/dt measured at rated reverse voltage.