ꢀꢀꢀꢀ
SLG59M1657V
2
An Ultra-small 3 mm , 8.4 mΩ, 4 A, 125 °C-Rated
Internally-protected Load Switch
General Description
Pin Configuration
The SLG59M1657V is a high performance 8.4 mΩ, 4 A
single-channel nFET load switch which can operate with a
2.5 V to 5.5 V VDD supply to switch power rails from as low as
0.9 V up to the supply voltage. The SLG59M1657V
incorporates two-level overload current protection, thermal
shutdown protection, and inrush current control which can
easily be adjusted by a small external capacitor.
8
7
6
5
1
2
3
4
VDD
ON
D
GND
CAP
S
Using a proprietary MOSFET design, the SLG59M1657V
achieves a stable 8.4 mΩ RDSON across a wide input voltage
range. In addition, the SLG59M1657V’s package also exhibits
low thermal resistance for high-current operation using
Renesas’s proprietary CuFET technology.
D
S
8-pin FC-TDFN
(Top View)
Fully specified over the -40 °C to 125 °C temperature range,
the SLG59M1657V is packaged in a space-efficient, low
thermal resistance, RoHS-compliant 1.5 mm x 2.0 mm STDFN
package.
Applications
•
•
•
Notebook Power Rail Switching
Tablet Power Rail Switching
Smartphone Power Rail Switching
Features
•
1.5 x 2.0 mm TDFN package (2 fused pins for drain and 2
fused pins for source)
•
Logic level ON pin capable of supporting 0.85 V CMOS
Logic
•
•
•
User selectable ramp rate with external capacitor
8.4 mΩ RDSON while supporting 4 A
Two Over Current Protection Modes
• Short Circuit Current Limit
• Active Current Limit
•
•
•
•
Over Temperature Protection
Pb-Free / Halogen-Free / RoHS compliant
Operating Temperature: -40 °C to 125°C
Operating Voltage: 2.5 V to 5.5 V
Block Diagram
4 A @ 8.4 mΩ
D
S
CIN
CLOAD
VDD
+2.5 V to 5.5 V
Charge
Pump
Linear Ramp
Control
CAP
CSLEW
4 nF
Over Current and
Over Temperature
Protection
ON
CMOS Input
0.85 V to 5.5 V
GND
Datasheet
3-Feb-2022
Revision 1.02
Page 1 of 18
©2022 Renesas Electronics Corporation
CFR0011-120-01