SLG46827-A
Auto Grade GreenPAK Programmable Mixed-Signal Matrix
with In-System Debug
General Description
The SLG46827-A provides a small, low power component for commonly used Mixed-Signal functions. The user creates the
circuit design by programming the multiple time Non-Volatile Memory (NVM) to configure the interconnect logic, the IOs, and
the macrocells of the SLG46827-A. Dual power supply allows to flexibly interface two independent voltage domains.This
highly versatile device allows a wide variety of Mixed-Signal functions to be designed within a very small, low power single
integrated circuit.
In-System Debug
Multiple Time Programmable Memory in Development
Wide Range Power Supply
Key Features
Two High Speed General Purpose Rail-to-Rail Analog
Comparators (ACMPxH)
Two Low Power General Purpose Rail-to-Rail Analog
Comparators (ACMPxL)
2.5 V (±8 %) to 5 V (±10 %) VDD
1.8 V (±5 %) to 5 V (±10 %) VDD2 (VDD2 ≤ VDD)
Operating Temperature Range: -40 °C to +105 °C
RoHS Compliant/Halogen-Free
Packages Available
Two Voltage References
Two Vref Outputs
Eleven Combination Function Macrocells
20-pin TSSOP: 6.5 mm x 6.4 mm x 1.2 mm, 0.65 mm
pitch
Three Selectable DFF/LATCH or 2-bit LUTs
One Selectable Programmable Pattern Generator or
2-bit LUT
AEC-Q100 Grade 2 Qualified
Six Selectable DFF/LATCH or 3-bit LUTs
One Selectable Pipe Delay or Ripple Counter, or
3-bit LUT
Eight Multi-Function Macrocells
Seven Selectable DFF/LATCH or 3-bit LUTs + 8-bit
Delay/Counters
One Selectable DFF/LATCH or 4-bit LUT + 16-bit
Delay/Counter
Serial Communications
I2C Protocol Interface
Programmable Delay with Edge Detector Output
Deglitch Filter or Edge Detector
Three Oscillators
2.048 kHz Oscillator
2.048 MHz Oscillator
25 MHz Oscillator
Analog Temperature Sensor
Power-On Reset
Applications
Car Navigation and Telematics
In-Car Infotainment/Dashboard
Automotive Display Clusters
Advanced Driver Assistance Systems (ADAS)
Datasheet
24-Feb-2021
Revision 3.2
1 of 180
© 2021 Dialog Semiconductor
CFR0011-120-00