SL358
Low Power Dual Operational
Amplifier
The SL358 contains two independent high gain operational
amplifiers with internal frequency compensation. The two op-amps
operate over a wide voltage range from a single power supply. Also
use a split power supply. The device has low power supply current
drain, regardless of the power supply voltage. The low power drain
also makes the SL358 a good choice for battery operation.
When your project calls for a traditional op-amp function, now you
can streamline your design with a simple single power supply. Use
ordinary +5VDC common to practically any digital system or personal
computer application, without requiring an extra 15V power supply just
to have the interface electronics you need.
ORDERING INFORMATION
SL358N Plastic
SL358D SOIC
TA = 0° to 70° C
for all packages.
The SL358 is a versatile, rugged workhorse with a thousand-and-
one uses, from amplifying signals from a variety of transducers to dc
gain blocks, or any op-amp function. The attached pages offer some recipes that will have your project cooking
in no time.
·
·
·
Internally frequency compensated for unity gain
Large DC voltage gain: 100dB
Wide power supply range:
3V ~ 32V (or ±1.5V ~ ±16V)
·
·
·
·
·
Input common-mode voltage range includes ground
Large output voltage swing: 0V DC to VCC-1.5V DC
Power drain suitable for battery operation
Low input offset voltage and offset current
Differential input voltage range equal to the power supply voltage
LOGIC DIAGRAM
PIN ASSIGNMENT
PIN 4 = GND
PIN 8=VCC
System Logic
Semiconductor
SLS