DATA SHEET
AAT2601/2601A
T
o
tal Power Solution for Portable Applications
Features
General Description
•
•
The AAT2601 and AAT2601A are members of Skyworks'
Total Power Management IC (TPMICTM) product family.
They contain a single-cell Lithium Ion/Polymer battery
charger, a fully integrated step-down converter and 5 low
dropout (LDO) regulators. The device also includes 2 load
switches for dynamic power path/sleep mode operation,
making it ideal for small handheld portable GSM or CDMA
mobile telephones.
Voltage Regulator VIN Range: 4.5V to 6V
Complete Power Integration
Integrated Load Switches to Power Converters from
AC Adapter or Battery Automatically
Low Standby Current
▪
•
•
170μA (typ) w/ Buck (Core), LDO1 (PowerDigital),
and LDO2 (PowerAnalog) Active, No Load
One Step-Down Buck Converter (Core)
▪
1.8V, 300mA Output
3.3V, 300mA Output (AAT2601A-3.3 ONLY)
1.5MHz Switching Frequency
▪
The battery charger is a complete thermally regulated
constant current/constant voltage linear charger. It
includes an integrated pass device, reverse blocking pro-
tection, high accuracy current and voltage regulation,
charge status, and charge termination. The charging
current, charge termination current, and recharge volt-
age are programmable with an external resistor and/or
by a standard I2C interface. The AAT2601 has a typical
battery under-voltage lockout of 2.35V and the AAT2601A
has a typical battery under-voltage lockout of 2.9V.
▪
▪
▪
Fast Turn-On Time (100μs typ)
Five LDOs Programmable with I2C
•
•
LDO1: 3.0V, 300mA (PowerDigital)
LDO2: 3.0V, 150mA (PowerAnalog or PLL)
LDO3: 3.0V, 150mA (TCXO)
LDO4: 3.0V, 150mA (TX)
LDO5: 3.0V, 150mA (RX)
PSRR: 60dB@10kHz
Noise: 50μVrms for LDO3, LDO4, and LDO5
▪
▪
▪
▪
▪
▪
The step-down DC/DC converter is integrated with internal
compensation and operates at a switching frequency of
1.5MHz, thus minimizing the size of external components
while keeping switching losses low and efficiency greater
than 92%. All LDO output voltages are programmable
using the I2C interface.
▪
One Battery Charger
Digitized Thermal Regulation
Charge Current Programming up to 1.4A
Charge Current Termination Programming
Automatic Trickle Charge for Battery Preconditioning
▪
▪
▪
▪
(2.8V Cutoff)
The five LDOs offer 60dB power supply rejection ratio
(PSRR) and low noise operation making them suitable for
powering noise-sensitive loads.
•
•
•
•
•
•
•
Adapter OK (ADPP) and Reset (RESET) Timer Outputs
AAT2601 Typical UVLO: 2.35V
AAT2601A Typical UVLO: 2.9V
Separate Enable Pins for Supply Outputs
Over-Current Protection
All six voltage regulators operate with low quiescent cur-
rent. The total no load current when the step-down con-
verter and 2 LDOs are enabled is only 170μA.
Over-Temperature Protection
5x5mm TQFN55-36 Package
The AAT2601 and AAT2601A are available in a thermally
enhanced low profile 5x5x0.75mm 36-pin TQFN package.
Applications
•
•
•
•
•
Digital Cameras
GSM or CDMA Cellular Phones
Handheld Instruments
PDAs and Handheld Computers
Portable Media Players
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
1
202179B
• Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • March 19, 2013